Bosch DB24C4200R2 Operation Manual - Page 63
Automatic Alarm Recording, Automatic Display of Incoming Alarms
View all Bosch DB24C4200R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DiBos/DiBos Micro Operation - Live/Playback Mode | en 63 5.2 Automatic Alarm Recording Incoming alarms can be recorded automatically (standard) or manually on the recipient. The selection is made in the configuration. In both cases, all the cameras that are assigned to the alarm in the device list are displayed. Recording takes place without audio. The tab flashes red. An audio signal sounds, if this has been configured. 1. Click the tab. The cameras or remote stations in alarm status are listed. The audio signal is switched off. The button for alarm recording is displayed. 2. Click the icon if you want to stop alarm recording. Alarm recording is stopped. Click the button to start alarm recording. Alarm recording is started. Click the button to stop alarm recording. NOTICE! - Alarm recording finishes when the alarm is deleted. - The button for alarm recording is immediately displayed when incoming alarms are automatically displayed (see Section 5.1.2 Automatic Display of Incoming Alarms). Bosch Sicherheitssysteme GmbH Operation Manual F.01U.033.372 | V5 | 2009.09