Bosch DVR16E2302 Installation Instructions - Page 30

Divar | Installation Manual | Operating instructions EN | 3-12 Triggers and alarms Various types of events can change the way the unit works. These events can be: • An alarm input signal applied to the unit. • Motion detection in a camera signal. • An alarm input signal from a Bilinx camera***. • A loss of video from one of the cameras. • An internal alert from the unit itself. The way the unit reacts to events depends on how it has been programmed. An event can cause either a trigger or an alarm. A trigger can change the way the unit works but does not require a response from the user. An alarm can also change the way the unit works but, in addition, it usually activates several indicators and requires that the user acknowledges the alarm situation. The unit can react to an event in any one of the following ways: Alarms • A beeper sounds • A status message is displayed • An alarm icon is displayed. • The border around a cameo can change color • An alarm indicator , , or flashes • The indicator flashes • An output relay is activated Alarms and Triggers • The view modes on the monitors change • A controllable camera is moved to a pre-defined position. • Recording speed changes • The unit changes the way it operates via pre-defined profiles. Background events Triggers and alarms can change background tasks that you, as user, may not even notice. Unit responses that are not visible to the user are, for example, a change in recording speed, the activation of the output relay and event logging. The unit can also be configured to record and automatically protect video clips upon the activation of an alarm input. A trigger may change the way the camera images are displayed on the monitors without requiring your intervention. Bosch Security Systems