Bosch DVR16E2302 Installation Instructions - Page 41
Power Supply, Testing, Maintenance
View all Bosch DVR16E2302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Divar | Installation Manual | Hardware setup EN | 4-9 Power Supply Power is supplied to the unit via the IEC-style socket. The unit has no on/off switch for security reasons. This means that the unit is always powered as long as the power cable is connected from the unit to a live power socket. Specifications: Input Voltage: Current: Input Frequency: 100 - 240 Vac ±10% 0.7A - 0.3A 50/60 Hz Power supply socket Signal name: LIVE NEUTRAL PE Pin no. 1 2 3 Description AC live AC neutral Protective Earth N E L Panel view Testing In Live mode, select full-screen display for each camera and check the picture quality. If the quality is poor, check: • The BNC connections. • Loop-through terminations. • Video levels of incoming signals and the possibility of ground loops. Record for at least three minutes at the highest recording speed Then play back the recording, selecting each camera for full-screen display in turn. Check the playback picture quality. Check to see whether the programmed quality setting is adequate. Maintenance Maintenance of this unit is limited to external cleaning and inspection. Refer all servicing to qualified personnel. WARNING! Do not open the top cover or attempt to service the unit as this may expose you to dangerous voltages and other hazards. Opening the unit will void the warranty! Bosch Security Systems