Bosch NEM7552UC Installation Instructions - Page 3
Before, begin - manual
View all Bosch NEM7552UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
d IMPORTANT SAFETY INSTUCTIONS INSTALLER: IMPORTANT: Important safety instruction Equipment and usage safety requirements Before you begin READ AND SAVE THESE INSTRUCTIONS LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE AFTER INSTALLATION IS COMPLETE. SAVE FOR THE LOCAL INSPECTOR'S USE. d WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer, service agency, or manufacturer. Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference. Be sure your appliance is properly installed and grounded by a qualified technician. Never modify or alter the construction of the appliance. For example, do not remove leveling legs, panels, wire covers or antiĆtip brackets/screws. Remove all tape and packaging before using the appliance. Destroy the packaging after unpacking the appliance. Never allow children to play with packaging material. Before you plug in an electrical cord, be sure all controls are in the OFF position. To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches (12.7 cm) beyond the bottom of the cabinet. This appliance has been tested in accordance with ANSI/UL 858 Standard for Safety for Household Electric Ranges and CAN/CSA-22.2 No.61 National Standard of Canada for Household Cooking Ranges. It is the responsibility of the owner and installer to determine if additional requirements and standards apply in specific installations. Tools and parts needed Note: Parts included 1. Philips head screwdriver 2. Pencil 3. Drill with 1/4 bit 4. Jigsaw 5. Tape measure Additional materials may be necessary for installation in solid surface countertops. Contact the countertop manufactor. 1. Hold down brackets 2. Clamping screws (4) 3. Sheet metal screws (4) 3