Bosch SGE53B55UC Use and Care Manual 1 - Page 19

Before using for the first time en-us 7.7 Rack heights Set the racks at the right height. Appliance height 32 inches with silverware basket Level 1 max. ø 2 max. ø 3 max. ø Upper rack 8.5" 9.5" 10.5" Lower rack 12" 11" 10" Before using for the first time 8 Before using for the first time Before using for the first time Apply the settings for the first use. 8.1 Initial use Before the first use, or after a factory reset, you will need to configure the settings. Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect™ app. → "Home Connect™ quick start", Page 32 Requirement: The appliance has been installed and connected. 1. Add special salt. 2. Add rinse aid. → Page 21 3. Switch on the appliance. → Page 28 4. Set the water softening system. → Page 20 5. Set the amount of rinse aid. → Page 22 6. Add detergent. 7. Start the Program with the highest cleaning temperature without dishware. To remove any marks from water or other residues, we recommend you operate the appliance without dishware before using it for the first time. Tip: You can change these settings and other Basic settings → Page 30 at any time. Water softening system 9 Water softening system Water softening system Hard water leaves limescale on dishware as well as the washing tank, and parts of the appliance may become blocked. To ensure good dishwashing results, you can treat the water with special salt and the water softening system. To avoid damage to the appliance, water with a hardness above 9 °E must be softened. 9.1 Overview of water hardness settings You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester. 19