Bosch SGE53B55UC Use and Care Manual 1 - Page 29
Activating the button, Deactivating the, button lock, Interrupting the wash, cycle, Terminating
View all Bosch SGE53B55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
¡ You can only change a cycle in progress if you can cancel it first. → "Terminating the wash cy- cle", Page 29 ¡ To save energy, the appliance switches off automatically 10 minutes after the end of the wash cycle. If you open the appliance door immediately after the wash cycle has ended, the appliance will switch off after 4 seconds. 13.7 Activating the button lock The button lock prevents the appliance from being operated accidentally or incorrectly while running. ▶ Press onds. for approx. 3 sec- a The button lock is activated and will be automatically deactivated at the end of the cycle. a flashes on the display when the appliance is running. a The button lock remains acti- vated with a power failure. 13.8 Deactivating the button lock ▶ Press onds. for approx. 3 sec- Basic Operation en-us 13.10 Terminating the wash cycle To end a cycle early or to switch from one that has already started, you will need to cancel it first. ▶ Press for approx. 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "0h:01m" and the residual water is pumped out. a The cycle is cancelled and ends after approx. 1 minute. 13.11 Switching off the appliance CAUTION To avoid risk of injury, always use caution when opening the door during or following a wash cycle as hot water or steam may escape. ▶ Do not fully open the door until water noises have stopped and steam has subsided. 1. Please note the information on Preventing Material Damage. 2. Press On/Off. 13.9 Interrupting the wash cycle 1. Press On/Off. The program is saved and the appliance switches off. 2. Press On/Off. 3. Press cycle. to resume the wash 29