Bosch SGE53U55UC Instructions for Use - Page 18
Auto Power Off
View all Bosch SGE53U55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting the Amount of Rinse Aid The amount of rinse aid dispensed can be set from "r:00" to "r:06". To change the setting: 1 Press the [On/Off] button. 2 Hold down the "A" button (see page 15) and press [Start] until the display indicates "H:0x" (x can be any number). 3 Release both buttons. 4 Press the "A" button until the display shows "r:05". 5 Press the "C" button to select the desired setting. "r:00" = dispenser is OFF "r:01" = lowest setting "r:02" = low setting "r:03" = medium setting "r:04" = medium/high setting "r:05" = high setting "r:06" = highest setting 6 Press [Start] to save the setting. Delay Start You can delay the start of the cycle in one hour increments up to 24 hours. To set delay start: 1 Press the [On/Off] button. 2 Press the [+] button until the display jumps to "h:01". 3 Press the [+] or [-] button until the displayed time corresponds with your requirements. h:01 = 1 hour delay h:24 = 24 hour delay 4 Press [Start] to activate delay start. To cancel delay start: 1 Press the [+] or [-] button until "h:00" is indicated on the digital display. 2 Press and hold [Start] for 3 seconds to cancel the cycle. You may now start a new cycle. Auto Power Off To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be adjusted from P:00 to P:02. To change the setting: 1 Press the [On/Off] button. 2 Hold down the "A" button (see page 15) and press [Start] until the display indicates "H:0x" (x can be any number). 3 Release both buttons. 4 Press the "A" button until the display indicates "P:0x". 5 Press the "C" button until the display corresponds with your requirements. P:00 = dishwasher does not turn off automatically P:01 = dishwasher turns off automatically after 1 minute P:02 = dishwasher turns off automatically after 120 minutes (2 hours) 6 Press [Start] to save the setting. 16