Bosch SGE63E06UC Installation Instructions - Page 12

Attaching the Toe Panel Your dishwasher comes with a three-piece toe panel(select models) to allow height adjustment. 1. Position the slotted rear toe panel on the dishwasher irst. Allow it to rest on the loor. 2. Position the mating front toe panel on top of the rear toe panel allowing the angled edge to rest on the mating edge of the dishwasher. 3. Drive the two black screws (included) through the hole in the toe panel to secure. Use the supplied screws to avoid damaging the dishwasher. See Figure 19. 4. For models with outer toe panel (3rd piece) slide the brackets (A) provided, into the slots of the toe panel you just attached. NOTE: Once you determine the correct position for the brackets , remove the bracket and bend the metal tab. See Figure 20. This ensures that the toe panel wont slide in further than you need. 5. Re-insert the brackets. 6. Attach the outer toe panel (L) onto the brackets and drive the screws provided in place to secure the toe panel. NOTE: The rubber piece should remain behind the outer toe panel. Figure 19 Figure 20 A (K) (L) - See Page 5 12