Bosch SGE78C55UC Use and Care Manuals - Page 50
Setting the amount of rinse aid, Adding rinse aid, Loading dishware,
View all Bosch SGE78C55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
en-us Troubleshooting Issue Cause and troubleshooting There are remov- Amount of rinse aid to be dispensed is set too able streaks on high. glasses, glassware ▶ Set the rinse aid system to a lower setting. with a metallic ap- → "Setting the amount of rinse aid", Page 25 pearance and silverware. No rinse aid has been added. ▶ Add rinse aid. → "Adding rinse aid", Page 24 There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by dishware and will not open fully. 1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by dishware. → "Loading dishware", Page 28 Items of dishware are blocking the dispenser lid. 2. Do not place dishware or fragrance dispensers in the tab collecting tray. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. Irreversible clouding Glasses are not dishwasher-proof, only suitable of glassware. for dishwashers. ▶ Use dishwasher-proof glasses. Glasses are usually only suitable for cleaning in a dishwasher, i.e. long-term wear or longterm changes must be expected. ▶ Avoid a lengthy steam phase (standing time after wash cycle ends). ▶ Use a program with a lower temperature. ▶ Set the softening system to the water hardness. → "Setting the water softening system", Page 23 ▶ Use detergent with a glass protection component. Detergent residue is Spray arms were blocked by dishware so deter- present in the deter- gent was not rinsed out. gent dispenser or ▶ Check that the spray arms are not blocked and the tab collecting can rotate freely. tray. Detergent dispenser was damp when detergent was added. 50