Bosch SGX78C55UC Use and Care Manuals - Page 32
Starting the wash, cycle, Interrupting the wash, Terminating the, wash cycle, Switching off the,
View all Bosch SGX78C55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
en-us Basic Operation 13.6 Starting the wash cycle ▶ Press . a The wash cycle has ended when the display shows "0h:00m". Notes ¡ If you want to add more dish- ware while the appliance is running, do not use the collecting tray as a handle for the upper rack. You might touch the partially dissolved tablet. ¡ You can only change a cycle in progress if you can cancel it first. → "Terminating the wash cycle", Page 32 ¡ To save energy, the appliance switches off automatically 10 minutes after the end of the wash cycle. If you open the appliance door immediately after the wash cycle has ended, the appliance will switch off after 4 seconds. 13.7 Interrupting the wash cycle 1. Press On/Off. The program is saved and the appliance switches off. 2. Press On/Off. 3. Press cycle. to resume the wash 13.8 Terminating the wash cycle To end a cycle early or to switch from one that has already started, you will need to cancel it first. ▶ Press for approx. 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "0h:01m" and the residual water is pumped out. a The cycle is cancelled and ends after approx. 1 minute. 13.9 Switching off the appliance CAUTION To avoid risk of injury, always use caution when opening the door during or following a wash cycle as hot water or steam may escape. ▶ Do not fully open the door until water noises have stopped and steam has subsided. 1. Please note the information on Preventing Material Damage → Page 9. 2. Press On/Off. 32