Bosch SGX78C55UC Use and Care Manuals - Page 44

Cleaning filters, Setting the amount of rinse aid,

Get Bosch SGX78C55UC PDF manuals and user guides View all Bosch SGX78C55UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

en-us Troubleshooting Issue E:61-03 lights up alternately. Water is not draining. Cause and troubleshooting Not an appliance error. High loop is missing and/ or debris flushed back into drain hose and blocked it. ▶ Be sure there is a high loop in the drain hose and that no debris has flushed back into the hose. E:90-01 lights up alternately. Power voltage is too low. There is no problem with the appliance. 1. Call an electrician. 2. Have the power voltage and electrical installation checked by an electrician. E:92-40 lights up al- Filters are soiled or blocked. ternately. ▶ Clean the filters. → "Cleaning filters", Page 40 A different error code appears in the display window. E:01-00 to E:90-10 Dishware is not dry. There is a technical issue. 1. Press . 2. Pull out the power cord plug of the appliance or switch off the breaker. 3. Wait at least 2 minutes. 4. Insert the power cord plug of the appliance in a power outlet or switch on the breaker. 5. Switch the appliance on. 6. If the problem occurs again: ‒ Press . ‒ Turn off the water faucet. ‒ Pull out the power cord plug. ‒ Contact customer service → Page 56 and give the error code. No rinse aid used or dosage set too low. 1. Add Rinse aid → Page 24. 2. Set the amount of rinse aid to be dispensed. → "Setting the amount of rinse aid", Page 25 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
en-us
Troubleshooting
44
Issue
Cause and troubleshooting
E:61-03 lights up al-
ternately. Water is
not draining.
Not an appliance error. High loop is missing and/
or debris flushed back into drain hose and
blocked it.
▶
Be sure there is a high loop in the drain hose
and that no debris has flushed back into the
hose.
E:90-01 lights up al-
ternately.
Power voltage is too low.
There is no problem with the appliance.
1.
Call an electrician.
2.
Have the power voltage and electrical installa-
tion checked by an electrician.
E:92-40 lights up al-
ternately.
Filters are soiled or blocked.
▶
Clean the filters.
→
"Cleaning filters", Page 40
A different error
code appears in the
display window.
E:01-00 to E:90-10
There is a technical issue.
1.
Press
.
2.
Pull out the power cord plug of the appliance or
switch off the breaker.
3.
Wait at least 2 minutes.
4.
Insert the power cord plug of the appliance in a
power outlet or switch on the breaker.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press
.
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service
→
Page 56
and
give the error code.
Dishware is not dry.
No rinse aid used or dosage set too low.
1.
Add Rinse aid
→
Page 24
.
2.
Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page 25