Bosch SHE89PW55N Instructions for Use - Page 35
AquaSensor, Time display, Sensor setting, Extra Dry, Eco forecast, Auto power off
View all Bosch SHE89PW55N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
AquaSensor The rosneSauqA AquaSensor is an optical measuring device which measures the cleanliness of the rinse water. The AquaSensor is used according to the wash cycle. If the AquaSensor is active, "clean" rinse water can be transferred to the next rinse and water consumption can be reduced by 0.8-1-5 gal (3-6 liters). If the rinse water is not yet clear, the water is drained and is replaced with fresh water. In the automatic wash cycles the temperature and running time can also be adjusted to the degree of soiling. Time display The wash cycle time is determined during the wash cycle by the water temperature, the amount of dishes, as well as the degree of soiling and may vary (depending on the selected wash cycle). You can change the time display into time of day or hours/minutes so that the remaining cycle time of the wash cycle appears in the display window "Finish at" (for example 15:20 o'clock) or "Finish in" (for example 3:25 hours). Sensor setting The wash cycle sequence is optimized in Auto wash cycles with the aid of sensors. The sensors adjust the wash cycle strength of Auto wash cycles depending on the amount and type of soiling. You can adjust the sensitivity of the sensors in 3 stages. Standard: This setting is recommend for daily regular or typical use. This is the most energy efficient setting. Sensitive: This setting adjusts the wash cycle strength for the effective removal of food remnants, even if the amount of soiling is low. The energy Operating the Dishwasher en-us and water consumption is increased accordingly. Very sensitive: This setting adjusts the wash cycle strength for difficult conditions of use, for example firmly dried on food remnants. This setting is recommended if using biological or eco detergents which contain lower amounts of active agents. The energy and water consumption is increased accordingly. Extra Dry The final rinse uses a higher temperature which improves the drying result. The cycle time may increase slightly. (Caution if utensils are delicate!) You can switch the Extra Dry function on or off. There is a slight increase in energy consumption. Eco forecast When Eco forecast is activated, the average water and energy consumption of the selected wash cycle is briefly displayed in the digital display @. Auto power off This setting determines the length of time the control panel stays illuminated after the cycle is complete. To save energy, the recommended setting is "After one minute". Possible settings are: ■ off: The appliance does not switch off automatically. ■ After one minute: The appliance switches off after 1 minute. This is the most energy efficient setting. ■ After two hours: The appliance switches off after 2 hours. 35