Bosch SHX878ZD5N Use and Care Manual - Page 36
Warning, Caution
View all Bosch SHX878ZD5N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
en-us Operating the Dishwasher Auto power off This setting determines the length of time the control panel stays illuminated after the cycle is complete. To save energy the recommended setting is ˜:‹,. This setting can be adjusted from ˜:‹‹ to ˜:‹ƒ. dishwasher does not turn off automatically dishwasher turns off automatically after 1 minute dishwasher turns off automatically after 120 minutes (2 hours) To change the setting: 1. Press the On/Off button (. 2. Hold down the function key # and press the Start button P until the display 8 indicates š:‹x (x can be any number). 3. Release both buttons. 4. Press the function key # until the display 8 indicates ˜:‹x. 5. Press the function key 3 until the display corresponds with your requirements. 6. Press the Start button P. Switching off the appliance Short time after the end of the wash cycle: 1. Press On/Off button (. 2. Remove the dishes when they have cooled down. 9 WARNING RISK OF INJURY! To avoid risk of injury, always use caution when opening the door during or following a wash cycle as hot water or steam may escape. Do not fully open the door until water noises have stopped and steam has subsided. Interrupting the wash cycle 9 CAUTION Expansion (overpressure) may cause the appliance door to open and/or water to escape! If the door was opened on an appliance which has a hot water connection or is heated, always leave the door ajar for several minutes and then close. 1. Open the door. 2. Switch off On/Off switch (. The LED's go out. The wash cycle is saved. 3. To continue the wash cycle, switch on the On/Off switch ( again. 4. Close the door. Note: Your dishwasher is protected against unintentional operation. If the appliance door remains open for more than 4 seconds after pressing the Start button, the operation will be paused. Press the Start button again and close the appliance door. 36