Bose 251 Owner's guide - Page 11

English Installing Your 251TM Speakers Making the connections (cont.) Putting the speakers in the final location Loosen the knobs on each speaker to rotate the speakers into the desired position. Then, tighten the knobs to secure the speaker in its final position (Figures 18A and 18B). Figures 18A and 18B A. B. Putting the speaker in the final position A. Exterior of the house B. Deck railing or table Figure 19 Attaching the rubber feet Attaching the rubber feet If you do not plan to use the supplied brackets to mount your 251 environmental speakers, you can place them on a sturdy, level surface. They should be standing in the vertical position. Be sure to attach the rubber feet before using your speakers. For proper balance be sure to place the feet in the position shown in Figure 19. Figure 20 Rotating the Bose logo Rotating the Bose logo Mounting the speakers on a deck railing or table will require you to rotate the Bose logo. Using your fingers, gently lift the logo, taking care not to detach it from the speaker, about ⁄1 inch (.24 4 cm) and turn it 180º. 11