Bose 251 Owner's guide - Page 8

English Installing Your 251TM Speakers Installing the mounting brackets (cont.) Installing the brackets onto a deck railing or table (cont.) Finally, install the four screws using a Phillips-head screwdriver (Figure 10). Figure 10 Installing the bracket onto a deck railing or table Note: If you are mounting your 251TM speakers on a deck railing or table, you will need to rotate the Bose logo. Refer to "Rotating the Bose logo" on page 11 for instructions on how to do this. Attaching the speakers to the brackets Once the brackets are installed, carefully follow these steps to attach the speakers to the brackets. First, insert the knobs into each side of the speakers. Be sure to turn each knob two full rotations (Figure 11). Then, carefully slide the speakers into the brackets (Figure 12). Finally, temporarily tighten the speaker in a position that will allow you to easily connect the speaker wire (Figures 13A and 13B). Figure 11 Installing the knobs two full rotations Figure 12 Sliding the speakers into the brackets 8