Bose Acoustic Wave II 5-CD Changer Acoustic Wave® system II 5-CD chan - Page 8

English Español Français Setting Up Your Acoustic Wave® II CD Changer Making the connections Before you start this setup procedure, disconnect the AC power cord on your Acoustic Wave® music system II and set it aside. You will need to use it again in Step 3. On the back of the CD changer there are two cables that connect to your Acoustic Wave® music system II. 1. Insert the two connectors of the AUX input cable into AUX IN jacks on the back of the music system (Figure 3). Be sure to match the colors of the connectors and jacks: red to red, and white to white. 2. Plug the attached CD changer power cord into the AC power jack on the back of the music system. 3. Plug the small end of the power cord into the power jack on the back of the CD changer. 4. Plug the other end of the power cord into an AC (mains) wall outlet. After applying power, "PLEASE WAIT" appears on the display for about 30 seconds while the system prepares itself for operation. DO NOT insert any discs until this message disappears. Figure 3 AUX IN jacks Connecting cables and TM power cords 1 2 Acoustic Wave® music system II power jack 3 CD changer power jack AUX input cable 4 Acoustic Wave® music system II AC power cable 6