Bose Acoustimass 10 Owner's guide - Page 9
Setting Up - cable
View all Bose Acoustimass 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setting Up Connect the Acoustimass® module to the center and front cube speakers Use the 20 foot (6 m) cable with three pairs of wires to connect the Acoustimass module to the center and front cube speakers. Just press the custom RCA connectors in place. 1. Insert the gray connector marked C into the gray terminal on the center speaker. 2. Insert the black connector marked L into the black terminal on the left front speaker (to the left of the TV as you face it), and the black connector marked R to the black terminal on the right front speaker. 3. At the Acoustimass module, check to be sure the connectors are firmly inserted into the proper OUTPUT TO CUBE SPEAKER jacks. a. Black L connector to the L jack. b. Gray C connector to the C jack. c. Black R connector to the R jack. Figure 8 Making cube speaker connections Connect the Acoustimass module to the surround cube speakers Use the 50 foot (15 m) cable with gray RCA connectors to join the module to the surround speakers. 1. Insert the gray connector marked LS into the gray terminal on the left surround speaker (on your left as you face the TV). 2. Insert the gray connector marked RS into the gray terminal on the right surround speaker. 3. At the Acoustimass module, make sure the gray connectors are firmly inserted into the LS and RS OUTPUT TO SPEAKER jacks. Connect the Acoustimass module to the receiver Use the 20 foot (6 m) cable with five wire pairs to connect the Acoustimass module to your surround sound receiver. 1. Match the wire labels to the SPEAKER OUTPUT labels on the receiver: a. L wires go to the Left Front SPEAKER OUTPUT connections. b. C wires go to the Center SPEAKER OUTPUT connections. c. R wires go to the Right Front SPEAKER OUTPUT connections. d. LS wires go to the Left Surround (rear) SPEAKER OUTPUT connections. e. RS wires go to the Right Surround (rear) SPEAKER OUTPUT connections. 2. Match the polarity on the receiver. Connect the wire pairs in phase (+ to + and - to -). a. Connect each wire marked with a red collar (+) to the appropriate red (+) output. b. Connect each plain wire (-) to the appropriate black (-) output. 3. At the Acoustimass module, check to make sure all RCA connectors are firmly inserted into the proper INPUT FROM RECEIVER OR AMPLIFIER jacks. Black connectors go into L and R jacks. Gray connectors go into C, LS, and RS jacks. CAUTION: Do not connect the Acoustimass module directly to your television unless the television provides surround decoding circuitry and amplified outputs for all channels. AM183644_01_V.pdf December 20, 2001 9