Bose Cinemate Owner's guide - Page 15
To control a combination device - does not turn on
UPC - 017817372336
View all Bose Cinemate manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
SYSTEM SETUP English Español Français SYSTEM SETUP TV source button 4. Press the TV source button. Only the TV source button will remain lit. 5. On the remote keypad, enter the first device code for your brand of TV. 6. Check that the TV source button blinks twice and turns off after the code is entered. 7. Point the remote at your TV and press TV On-Off. If your TV does not respond, go back to Step 1 and try another code. Follow the same procedure for each of your other sources, using the appropriate device code and source button for each source. Note: During programming, the five source buttons will flash rapidly three times if you press an invalid key or enter an unavailable device code. If this happens, go back to Step 1 and start over. To control a combination device • If you are programming the remote to control a combination device that has more than one source, such as a VCR/DVD unit, you can program the combination code into either remote control source. You may find it convenient to program the code twice - once for the VCR and once for the DVD. • To find the right device code, first search the "COMBINATION" listings in the CineMate™ device codes book. If you cannot find a valid code there, then search the listings for individual device types (TV, CBL, VCR, DVD, etc.). Note: If you need to verify which device code is currently programmed in your remote, see "Verifying a device code" on page 21. 15