Bose FreeSpace 360P Owner's guide - Page 7
Making, connections, cont.
View all Bose FreeSpace 360P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
SAF M" 7 TB! t g, Making the connections (cont.) Checking the connections Check the speaker connections carefully. Make sure no loose strands of wire touch across terminals. This could create short circuits that can damage an amplifier or receiver. Tighten any loose connections before you plug in the receiver or amplifier. Testing the connections To make sure your speakers operate correctly, follow these steps: 1. Set the balance control on your receiver or amplifier to normal (centered). 2. Play some deep bass passages of music through the speakers. The sound should seem to come from a point between the two speakers. The bass should be full and natural. If not, your connections may be reversed, causing the speakers to play out of phase. To correct the problem, make sure all the wires are connected positive to positive (+ to +) and negative to negative (- to -). 7