Bose Lifestyle Powered Owners Guide - Page 12
Connecting the speakers to the Lifestyle, media center, Setting up the Zone 2 remote control - speaker system manual
View all Bose Lifestyle Powered manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the speakers Connecting the speakers to the Lifestyle® media center Figure 11 Connecting the speakers to the Lifestyle ® media center CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR LIFESTYLE® POWERED SPEAKER SYSTEM POWER 115/230V AC 50/60Hz 30W MAX. VOLTAGE SELECTOR 115V SELECT PROPER VOLTAGE AUDIO INPUT LISTED 917D ® AUDIO VIDEO EQUIPMENT REFER TO OWNER'S MANUAL FOR FULL INSTRUCTIONS POWERED [LEFT] SPEAKER SER. NO. LSSP1U 100823. E9931 ©2000 BOSE CORPORATION, FRAMINGHAM, MA 01701-9160 MADE IN U.S.A. OF DOMESTIC AND FOREIGN COMPONENTS. U.S. PATENT NOS. 4,158,756 4,061,890 4,577,069 AND RE.31,679 190140 TO ACCESSORY SPEAKER ONLY BLACK TO BLACK RED T O RED TV SENSOR EMIITRTER SDEARTIAAL 33V DC POWER 1.1A AUX RECORD TAPE L L L VCR L TV L VIDEO COMPOSITE INSP-UVTIDSEO 1 2SZPOEANKEESR AM FM 75 ANTENNA R OPTICAL OPTICAL INPUT DIGITAL OUTPAUUTDIO OUTPUTS R DIGITAL R R DIGITAL AUDIO DIGITAL INPUTS R DIGITAL COMPVOIDSEITOE S-VIDEO OUTPUTS FIX Ω Figure 12a Setting up a Zone 2 remote control Note: To extend the length of the cables, use the supplied 50-foot extension cable (shown as dotted line above). This cable connects the 6-foot audio input cable to the 3-foot FIX adapter cable. To connect the Lifestyle® powered speaker system to your media center refer to Figure 11. Then follow these steps: 1. Make sure all components are unplugged from the AC power (mains) outlet before making any connections. 2. Connect the attached 6-foot audio input cable to the supplied 3-foot adapter cable labeled FIX on the single-connector cable end. 3. Attach the smaller connector on the 3-foot FIX adapter cable to the ZONE 2 output jack on the rear of the Lifestyle® media center. Setting up the Zone 2 remote control You must set up a second remote control to operate the ZONE 2 output. 1. Remove the remote control battery cover and locate the miniature switches (Figure 12a). 2. Make sure the house code settings (switches 1, 2, 3, and 4) match those on your first remote. 3. Make sure switches 5, 7, and 8 are up, and 6 and 9 are down. Note: Refer to your Lifestyle® system owner's guide for more information on operating your system in more than one room. ON Note: If you would like to adjust volume using your Lifestyle® powered speaker system's volume control knob instead of a remote control, change "Zone 2 Protocol" to "Legacy" in the last (3 of 3 screen) system settings menu. 10 December 20, 2001 AM262842_00_V.pdf