Bose Lifestyle Powered Owners Guide - Page 14

Figure 13 Connecting the speakers to the Model 20 music center Connecting the speakers to the Model 20 music center CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR LIFESTYLE® POWERED SPEAKER SYSTEM POWER 115/230V AC 50/60Hz 30W MAX. VOLTAGE SELECTOR 115V SELECT PROPER VOLTAGE AUDIO INPUT LISTED 917D ® AUDIO VIDEO EQUIPMENT REFER TO OWNER'S MANUAL FOR FULL INSTRUCTIONS POWERED [LEFT] SPEAKER SER. NO. LSSP1U 100823. E9931 ©2000 BOSE CORPORATION, FRAMINGHAM, MA 01701-9160 MADE IN U.S.A. OF DOMESTIC AND FOREIGN COMPONENTS. U.S. PATENT NOS. 4,158,756 4,061,890 4,577,069 AND RE.31,679 190140 TO ACCESSORY SPEAKER ONLY BLACK TO BLACK RED T O RED VAR Figure 14 Setting up the RC-20 remote control To connect the Lifestyle® powered speaker system to your Lifestyle® system refer to Figure 13. Then follow these steps: Note: When making the connections, be sure to always connect the RED ends of the speaker wire to the RED ends of the other wire or terminal. 1. Make sure all components are unplugged from the AC power (mains) outlet before making any connections. 2. Connect the attached 6-foot audio input cable to the supplied 3-foot adapter cable labeled VAR on the single-connector end. 3. Attach the other end of the 3-foot VAR adapter cable to the ZONE 2 output jack on the rear of the Model 20 music center (not shown). Note: To extend the length of the cables, use the supplied 50-foot extension cable (shown in dotted line above). This cable connects the 6-foot audio input to the 3-foot VAR adapter cable. Setting up the remote control You must set up a second remote control to operate the ZONE 2 output. 1. Remove the remote control battery cover and locate the miniature switches (Figure 14). 2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those on your first remote. 3. Slide switch 8 up. Connecting power to your system CAUTION: If you purchased a dual-voltage system, it is important that you set the speakers to the correct voltage. To do this, refer to "Selecting the correct voltage" on page 5. Follow these steps to connect power to your Lifestyle® powered speaker system: 1. With the volume control on the left speaker turned all the way down (counterclockwise), plug the power cord from the left speaker into an AC power (mains) outlet. 2. Insert the power cord of the Lifestyle® system into an AC power (mains) outlet. 3. Set the volume control for the speakers to the two-o'clock position and turn on your music. 12 December 20, 2001 AM262842_00_V.pdf