Bose Lifestyle SoundTouch 135 Home Entertainment Operation Guide - Page 29
Resetting the system, Pairing the remote with the console, Performing a system software update
View all Bose Lifestyle SoundTouch 135 Home Entertainment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CARE AND MAINTENANCE Problem What to do No TV picture, but audio is • Check the TV video input selection. Make sure it is correct for the video heard source. • Make sure video cables are securely connected. A connected device does • Try connecting the included external IR emitter to the control console. not respond consistently to For guidance, press the Setup button on the control console. Select remote commands the device options and follow the on-screen instructions. Intermittent audio dropouts • Contact Bose® Customer Service to request a composite video cable heard on coaxial digital that can be used for the coaxial digital audio connection. audio inputs Resetting the system 1. Press and hold the power button on the control console for 5 seconds or until the power light on the control console changes to red. The power light on the control console changes to red when the system shuts down. 2. Press and release the power button on the control console to restart the system. The power light changes to blinking green and then solid green when the system is on and ready to use. 3. If you still cannot operate the system using the remote, try the next procedure to pair the remote with the control console. Pairing the remote with the console You may need to perform this procedure if you are replacing a remote or if troubleshooting instructions recommend it. 1. Make sure your system is on. If not, press the power button on the control console. 2. Hold the remote close to the control console. 3. Press and hold both the Mute button ( ) on the control console and the OK button on the remote at the same time for five seconds. The power light blinks when pairing is complete. 4. Press any remote button and verify that the power light on the control console blinks with each button press. Performing a system software update System software updates are available periodically and can be downloaded over the Internet to the USB drive included with your system. 1. Press the Setup button on the front of the control console to display the UNIFY® menu. 2. Using the remote navigation buttons, select Update. 3. Follow the instructions on the screen. Note: To make sure your Bose® remote is updated, hold the remote near the front of the control con- sole while it is being updated. English - 29