Bose Music English Owners Guide - Page 5
Low-power Radio-frequency Devices Technical Regulations, Product Power State Table, The product
View all Bose Music manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
REGULATORY AND LEGAL INFORMATION Low-power Radio-frequency Devices Technical Regulations Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Management Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Product Power State Table The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC and the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013. The product is equipment with HiNA functionality. Required Power State Information Standby Power Modes Networked Standby Power consumption in specified power mode, at 230V/50Hz input ≤ 0.5 W Wi-Fi®, Ethernet, and Bluetooth® ≤ 3.0 W Time after which equipment is automatically switched into mode < 2.5 hours ≤ 20 minutes Power consumption in networked standby if all wired network ports are connected and all wireless network N/A ports are activated, at 230V/50Hz input ≤ 3.0 W Wireless network port deactivation/activation procedures. Deactivating all networks will enable standby mode. Wi-Fi: To deactivate, insert a thin paperclip into the hole in the back of the amplifier and press and hold for 2 seconds until the light on the back of the amplifier blinks white 3 times. Bluetooth: To deactivate, clear the Bluetooth pairing list. Press and hold the Bluetooth button l on the amplifier for 10 seconds. To reactivate, connect a Bluetooth source. |5 E N G