Bose QuietComfort 2 Owner's guide - Page 5
For noise reduction, audio - cord
 |
View all Bose QuietComfort 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English For noise reduction and audio 2. Connect the headphones cord to an audio source. To enjoy both noise reduction and audio: 1. Gently push the headphones plug all the way into the connector opening until the plug housing is flush with the earcup. Note: The LO setting of the LEVEL switch lowers the volume levels of strong audio output signals which are common on airline systems. If you find that the volume level is too low, set the LEVEL switch to HI. 3. Put on the headphones. Then slide the power switch forward to the On position. The battery light indicator will illuminate. 3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
3
English
For noise reduction
and
audio
To enjoy both noise reduction and audio:
1.
Gently push the headphones plug all
the way into the connector opening until
the plug housing is flush with the
earcup.
2.
Connect the headphones cord to an
audio source.
Note:
The LO setting of the LEVEL switch
lowers the volume levels of strong audio
output signals which are common on airline
systems. If you find that the volume level is
too low, set the LEVEL switch to HI.
3.
Put on the headphones. Then slide the
power switch forward to the On position.
The battery light indicator will illuminate.