Bose SoundLink Around-ear Wireless II Owner's guide - Page 11
Headphone status indicators, Using the back-up audio cable
View all Bose SoundLink Around-ear Wireless II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Operation Headphone status indicators The battery and Bluetooth® indicators are located on the side of the right earcup. Green: Medium to full charge Blue blinking: Ready to pair Amber: Low charge White blinking: Connecting Red blinking: Need to charge White solid: Connected Battery charge level Each time you power on the headphones, the voice prompt will announce the headphone battery charge level. If you are connected to an iOS device, the device will display the headphone battery charge level near the upper right corner of the screen. Using the back-up audio cable Use the supplied back-up audio cable to connect a non-wireless device, or if the headphone battery is depleted. To use the audio cable: 1. Plug the audio cable into the connector on the left earcup. 2. Plug the audio cable into the connector on the device. Note: Make sure is in the off position when using the back-up audio cable. English - 11