Bose SoundTouch SA-5 English Owners Guide - Page 12
Initial Setup, Speakers Out
View all Bose SoundTouch SA-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
I nitial S etup 3. Using a small, flat-head screwdriver, tighten the screws on the terminals clockwise to secure the wires. 4. Reinsert the terminal block connector into the SPEAKERS OUT connector. 5. Follow the operating instructions for your unpowered speakers to connect the other end of the speaker wires to the speakers. Tip: Use a silicone caulking material such as RTV adhesive (available at hardware stores) to protect the wiring at any outdoor speaker connections. 12 - ENGLISH
12 - ENGLISH
INITIAL SETUP
3.
Using a small, flat-head screwdriver, tighten the screws on the terminals clockwise to
secure the wires.
4.
Reinsert the terminal block connector into the
SPEAKERS OUT
connector.
5.
Follow the operating instructions for your unpowered speakers to connect
the other end of the speaker wires to the speakers.
Tip:
Use a silicone caulking material such as RTV adhesive (available at hardware
stores) to protect the wiring at any outdoor speaker connections.