Bose SoundTouchSA-4 Amplifier Owner's Guide - Page 32
Appendix C: Wall mounting the, SoundTouch™ wireless adapter
View all Bose SoundTouchSA-4 Amplifier manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Appendices Appendix C: Wall mounting the SoundTouch™ wireless adapter Vertical orientation Horizontal orientation Connector panel is facing left. Connector panel is facing up. Follow these instructions to wall mount your SoundTouch™ wireless adapter. Install either vertically with the connector panel facing left, or horizontally with the connector panel facing up. Note: Mounting hardware must be purchased separately. If the mounting hardware instructions differ from these instructions, follow the mounting hardware instructions. • Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill hole with a ⅛ in. (3.17 mm) drill. Use (2) #8x1¼ in. (32 mm) pan-head wood screws. • Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard. Drill pilot hole with a ³/16 in. (4.76 mm) drill. Use (2) #6-8x1 in. (25.4 mm) plastic wall anchors, and (2) #8x1¼ in. (32 mm) pan-head wood screws. Wood Wallboard ¼ in. (6.35 mm) above surface ¼ in. (6.35 mm) above surface 1. Mark holes on the wall 6¼ in. (158.7 mm) center-to-center. 2. Drill holes. Insert anchors (if used). 3. Install screws. Leave the screw heads ¼ in. (6.35 mm) above wall surface. 4. Position SoundTouch™ wireless adapter onto screws. Press firmly into place. 32 - English