Bose SoundTouchSA-4 Amplifier Owner's Guide - Page 33

Appendix D: Wall mounting the, SoundTouch, controller

Get Bose SoundTouchSA-4 Amplifier PDF manuals and user guides View all Bose SoundTouchSA-4 Amplifier manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Appendix D: Wall mounting the SoundTouch™ controller Appendices WARNING: The wall mount bracket contains magnetic material. Please contact your physician if you have any questions whether this might affect the operation of your implantable medical device. Follow these instructions to wall mount your SoundTouch™ controller. Use the bracket as a template to mark the holes. Tab Bracket Wallboard (anchors and screws supplied): 1. Use a ³/16 in. (5 mm) drill bit to drill two holes into ³/8 in. (9.5 mm) or thicker wallboard. 2. Insert the provided anchors into the holes and tap lightly to secure. 3. Align the bracket (tab at top) to the anchors. Tighten the provided screws into the holes. 4. Align the latch to the bracket's tab. Attach the controller. Wood: 1. Purchase two #6x1 in. (25.4 mm) flat-head wood screws. 2. Use a 7/64 in. (2.78 mm) drill bit to drill 2 holes into ³/4 in. (19 mm) or thicker wood. 3. Align the bracket (tab at top) to the holes. Tighten the screws into the holes. 4. Align the latch to the bracket's tab. Attach the controller. English - 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Appendices
English - 33
Appendix D: Wall mounting the
SoundTouch
™
controller
WARNING
:
The wall mount bracket contains magnetic material. Please
contact your physician if you have any questions whether this might
affect the operation of your implantable medical device.
Follow these instructions to wall mount your SoundTouch
™
controller. Use the
bracket as a template to mark the holes.
Wallboard (anchors and screws supplied):
1.
Use a
³
/
16
in. (5 mm) drill bit to drill two holes into
³
/
8
in. (9.5 mm)
or thicker wallboard.
2.
Insert the provided anchors into the holes and tap lightly to secure.
3.
Align the bracket (tab at top) to the anchors. Tighten the provided screws into
the holes.
4.
Align the latch to the bracket’s tab. Attach the controller.
Wood:
1.
Purchase two #6x1 in. (25.4 mm) flat-head wood screws.
2.
Use a
7
/
64
in. (2.78 mm) drill bit to drill 2 holes into
³
/
4
in. (19 mm)
or thicker wood.
3.
Align the bracket (tab at top) to the holes. Tighten the screws into the holes.
4.
Align the latch to the bracket’s tab. Attach the controller.
Tab
Bracket