Bose Surround English Owners Guide - Page 26

TROUBLESHOOTING UNABLE TO COMPLETE ADAPTIQ AUDIO CALIBRATION WITH YOUR SOUNDTOUCH 300 SOUNDBAR If you can't complete ADAPTiQ audio calibration with your SoundTouch 300 ­soundbar, listen to the voice prompts for the following error messages: ERROR MESSAGE PROBLEM WHAT TO DO The microphone on the ADAPTiQ headset can't detect sound. Secure all cables. Disconnect the ADAPTiQ headset cable and reconnect it firmly into the soundbar's a connector. 1 Ensure the microphone opening on the top of the ADAPTiQ headset is not blocked. Your ADAPTiQ headset may be damaged. Call Bose customer service for replacement parts. 2 The room is too loud. Re-run ADAPTiQ audio calibration when the room is quiet. The ADAPTiQ headset Move the ADAPTiQ headset farther away 3 is too close to from the speakers. the speakers. 4 The listening locations Move 1 - 2 ft. (0.3 - 0.6 m) away from your are too similar. previous listening location. The ADAPTiQ Hold your head still. 5 headset cannot take ­measurements due to movement. After correcting your problem, you must re-run ADAPTiQ audio calibration (see page 18). If you hear a different error message, contact Bose customer service for further instructions. | 2 6 E N G