Bose Videowave III Entertainment Owner's Guide - Page 30

Changing Your System Setup Installing the IR emitter In order to control external sources like a set-top box or DVD player, the control console is designed to transmit infrared (IR) signals to them. In some cases, the sources may not reliably receive these signals, resulting in inconsistent control. If this ­occurs, please install the included IR emitter cable for one, two, or three sources according to the following instructions. 1. Insert the plug on the IR emitter cable into the IR connector on the control console. 2. Place each emitter head so the flat side is against the front panel of each source. 3. Using the supplied adhesive pad, attach the emitter head to the source. Note: You may need to change the position of each IR emitter head to obtain reliable control of connected sources. IR emitter heads External source External source IR IR emitter cable 30 - English