Bose Wave Radio III Owner's guide - Page 15

PERSONALIZING YOUR WAVE® RADIO III System settings were selected at the factory to satisfy most owners of a Wave® radio III. However, if you wish to adjust the system settings see the instructions on the following pages. The setup menu The setup menu allows you to customize the operation of the Wave® radio III. System Setting Menu Item Snooze Duration SNOOZE- Radio Data System RADIO TEXT(RBDS) Information Clock Time Format TIME- Display High Brightness Level BRIGHT HI- Display Low Brightness Level BRIGHT LO- Room Code ROOM- Capacitive touch control 30 min. system standby timer TOUCH PADAUTO OFF- System Reset RESET ALL- Factory Setting 10 MIN ON 12 HOUR 10 4 B _ _ _ - ON YES NO Choices 10 MIN, 20 MIN, 30 MIN, 40 MIN, 50 MIN, 60 MIN, OFF ON, OFF 12-HOUR, 24-HOUR 8-15 1-8 B _ _ _ -, C _ _ - _, D _ _ - -, E _ - _ _, F _ - _ -, G _ - - _, H _ - - -, I - _ _ _, J - _ _ -, K - _ - _, L - _ - -, M - - _ _, N - - _ -, O - - - _ ON, OFF YES, NO NO, YES Description Determines the snooze time duration. Enables (ON) or disables (OFF) the system to display RDS information. Sets the clock display for 12-hour (AM/PM) or 24-hour time. Sets the display brightness level when the unit detects high ambient light conditions. Sets the display brightness level when the unit detects low ambient light conditions. Sets the room code for your Wave® radio III when it is connected to your Lifestyle® system through a Bose® link network. The dashes following the room letter indicate how the microswitches should be set on the Lifestyle® remote control. Enables (ON) or disables (OFF) the touch pad. Enables (YES) or disables (NO) the 30-minute system standby timeout. Refer to "Turning the Wave® radio III on and off" on page 9. Restores the Wave® radio III to factory settings. To change a system setting: 1. Press and hold Alarm Setup (Menu) until -SETUP MENU- is displayed. 2. Press Tune/Playlist > until the menu item you want to change is displayed. 3. Press Time - or Time + to change the value or selection. 4. Press Alarm Setup (Menu) to exit the setup menu or wait 10 seconds for the setup menu to exit automatically. English - 15