Bowflex Revolution Accessory Rack Assembly Manual - Page 5
Parts, Hardware, Tools
View all Bowflex Revolution Accessory Rack manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Parts: • Base Plate (#6) • Seat Bracket (#8) • Preacher Curl Mount (#5) Hardware Qty • 7/8" Bolts (#13) 5 • Washers (#16) 5 Tools: • Allen wrench (7/32") 1-1 Attach the Seat Bracket (#8) to the Base Plate (#6) using the hardware as shown in Figure 1. 1-2 Attach the Preacher Curl Mount (#5) to the Base Plate using the hardware shown in Figure 1. Tighten hardware completely. � Figure 1 step 1 � � Parts: • Left Tube (#11) • Right Tube (#12) • Base Bracket (#2) Hardware Qty • 2 3/4" Bolts (#14) 4 • Washers (#16) 8 • Nuts (#15) 4 Tools: • Allen wrench (7/32") • Wrench/Socket (9/16") or Open End Wrench 2-1 Attach the Base Bracket (#2) to the Left Tube (#11) and Right Tube (#12) using the hardware as shown in Figure 2. Make sure that the large holes on the Tube uprights are facing away from the Base Bracket. Note: Do not tighten hardware at this time. �� Figure 2 step 2 � �� 5