Brother International 5234PRW Users Manual - English and Spanish
Brother International 5234PRW Manual
View all Brother International 5234PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International 5234PRW manual content summary:
- Brother International 5234PRW | Users Manual - English and Spanish - Page 1
English Español HANDBOOK FOR COMPACT OVERLOCK MACHINE MANUAL DE INSTRUCCIONES DE LA MAQUINA COMPACTA OVERLOCK Product Code: 884-B01 Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). Visítenos en http://solutions. - Brother International 5234PRW | Users Manual - English and Spanish - Page 2
area, such as threading needle, changing needle, or changing presser foot, etc. 15. Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 16.This sewing machine is not - Brother International 5234PRW | Users Manual - English and Spanish - Page 3
this manual before you replace or fit the presser foot, needle, or any other parts to make sure you fit them correctly. To repair or adjust the machine If the machine breaks down or needs adjustment, first follow the troubleshooting table to inspect and adjust the machine yourself. If the problem - Brother International 5234PRW | Users Manual - English and Spanish - Page 4
machine, your nearest authorized dealer is always happy to be of service. Enjoy yourself! CAUTION When threading or replacing needle, the main power and light switch of the machine maximum operating speed of this sewing machine is 1,300 stitches per minute are part of the machines normal operation. WARNING LABELS - Brother International 5234PRW | Users Manual - English and Spanish - Page 5
SAFETY INSTRUCTIONS I WARNING LABELS ...III Contents ...1 Chapter 1: Names of parts and their functions 2 Accessories ...3 Powering the machine ...4 Turning direction of hand wheel 4 Opening/ Closing front cover 4 Attaching/ Removing presser foot 4 Trim trap ...5 Free-arm sewing (removing - Brother International 5234PRW | Users Manual - English and Spanish - Page 6
D Front cover E Presser foot lifting lever F Main power and light switch G Stitch length adjustment dial H Hand wheel I Differential feed ratio adjustment dial J Stitch width dial K Thread guide 2 Inside of the front cover Tweezers (accessory) L Lower looper threading lever M Thread take-up for - Brother International 5234PRW | Users Manual - English and Spanish - Page 7
) 0 Instruction DVD: XB2007001 (NTSC) XB2014001 (PAL) A Thread change assembly: XB1991001 B Trim trap: XB1958001 C Stitch finger W: XB1902001 1 8 2 9 LG Optional accessory For further information about the following items, see CHAPTER 8. D Blind stitch foot: X76590002 E Gathering foot: SA213 - Brother International 5234PRW | Users Manual - English and Spanish - Page 8
This foot controller can be used on the machine with product code 884-B01. The product code is mentioned on the machine rating plate. Turning direction of hand wheel The hand wheel turns in a counterclockwise direction (direction of arrow). This is the same direction as an ordinary home sewing - Brother International 5234PRW | Users Manual - English and Spanish - Page 9
holds the trimmed fabric and thread produced when sewing. 2. Position the fabric, and start sewing. (See CHAPTER 5.) To install: Insert the trim trap until it contacts the front cover. NOTE: Be sure to position the positioning guide to the one on the machine. To remove: Slowly pull - Brother International 5234PRW | Users Manual - English and Spanish - Page 10
Retracting knife To sew without cutting the fabric edge, you need to retract to a maximum of 4 mm (5/32 inch). Selection mark Stitch width The normal stitch width setting for regular overlock stitch is 5mm (13/64 inch). To change the stitch width, turn the stitch width adjustment dial. 1 - Brother International 5234PRW | Users Manual - English and Spanish - Page 11
to find the correct adjustment. CAUTION When sewing thick non-stretchable material such as denim, do not use the differential feed as it may damage the fabric. Adjusting the presser foot pressure Turn the pressure adjustment screw on the top left of the machine. You can adjust by reffering the value - Brother International 5234PRW | Users Manual - English and Spanish - Page 12
tension may vary according to the type and thickness of the fabric and the type of thread used. Thread tension adjustments may be necessary for any change in sewing materials. 1 234 1 Yellow marked tension disc is for left needle. 2 Green marked tension disc is for right needle. 3 Pink marked - Brother International 5234PRW | Users Manual - English and Spanish - Page 13
is loose. Left needle thread is tight. Right needle thread is tight. Upper looper thread is tight. Lower looper thread is loose. Upper looper thread is loose. Lower looper thread is tight. Upper looper thread is loose. Lower looper thread is loose. Tighten right needle thread. (green) Loosen left - Brother International 5234PRW | Users Manual - English and Spanish - Page 14
to obtain the correct thread tension. Chart of thread tension adjustment, One-needle (Two-thread) A: Reverse B: Surface C: Needle thread D: Lower looper thread C A D B C A BD 10 Needle thread is tight. Lower looper thread is loose. Needle thread is loose. Lower looper thread is tight. Loosen - Brother International 5234PRW | Users Manual - English and Spanish - Page 15
English Needle This machine uses a standard home sewing machine needle. The recommended needle is SCHMETZ 130/705H (#80 or #90). Needle description wheel so that the line on the hand wheel is aligned to the line on the machine. 3. Hold the needle with its flat side away from you and insert it up as - Brother International 5234PRW | Users Manual - English and Spanish - Page 16
tree 2 Spool pin 3 Correct position Before threading 1. Turn off the main power and light switch for safety. 1 3 2. Raise the presser foot using presser foot lever. 2 How to use the thread spool cap When using sewing thread spools, the thread spool cap should be used as illustrated below. Make - Brother International 5234PRW | Users Manual - English and Spanish - Page 17
English CHAPTER 3 THREADING Thread for two-needle four-thread overlock stitch 3 4 left needle right needle 1 2 3 4 6 7 5 7 Thread for one-needle three-thread overlock stitch (right needle) 3 1 2 4 3 4 6 7 5 7 Thread for one-needle three-thread overlock stitch (left - Brother International 5234PRW | Users Manual - English and Spanish - Page 18
to the right and guiding the top toward you. 2. Pull the thread off the spool and directly up through the thread holder 1 and the thread holder 2 on the thread tree from back to front. 3. Pass the thread through the thread guide 3 on the top of machine. 4. Pass the thread through the tension disc - Brother International 5234PRW | Users Manual - English and Spanish - Page 19
. NOTE: If the lower looper thread breaks during sewing, cut and remove thread from both of the needles. Before re-threading the lower looper, make sure that the lower looper re-threading is done exactly as diagrammed. The machine will not operate properly if the threading is not done in the proper - Brother International 5234PRW | Users Manual - English and Spanish - Page 20
to the right and guiding the top toward you. 2. Pull the thread off the spool and directly up through the thread holder 1 and the thread holder 2 on the thread tree from back to front. 3. Pass the thread through the thread guide 3 on the top of machine. 4. Pass the thread through the tension disc - Brother International 5234PRW | Users Manual - English and Spanish - Page 21
off the spool and directly up through the thread holder 1 and the thread holder 2 on the thread tree from back to front. b) Hold the thread with your left and right hands, then pass the thread through the thread guide 3, and then pass the thread through the tension disc 4 which is in the channel - Brother International 5234PRW | Users Manual - English and Spanish - Page 22
the needle to pull out the end of the thread. 2 4 7. Raise the presser foot lever 1, then pass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine. 5cm 3 3. Cut the thread with the thread cutter 5 on the left side of the - Brother International 5234PRW | Users Manual - English and Spanish - Page 23
English CHAPTER 4 SEWING MATERIALS,THREADS AND NEEDLES COMPARISON CHART Material Fine materials: Georgette Lawn Organdy Tricot Stitch Overlock stitch Stitch Length (mm) 2.0 - 3.0 Thread Spun #80 - 90 Cotton #100 Filament #80 - 100 Needle SCHMETZ 130/705H #80 Fine materials: Georgette Lawn - Brother International 5234PRW | Users Manual - English and Spanish - Page 24
details. NOTE: You can use the optional accessory foot for even more varieties of stitches. See CHAPTER 8 for details. Test sewing Make the test sewing before you start sewing. 1. Set the thread tension as follows: · Set all the - Brother International 5234PRW | Users Manual - English and Spanish - Page 25
-off After test-sewing, continue to depress the foot controller slightly and chain-off 10cm (4 inches). The threads will entwine themselves into a chain automatically. 3 2 1 1 Presser foot 2 Upper knife 3 Seam Allowance Guide To remove work When the seam is finished, keep the machine running at - Brother International 5234PRW | Users Manual - English and Spanish - Page 26
manner. 1. Tie the thread unpicked from chain. At the end of a stitch 1. At the end of the seam, sew one stitch out of the fabric before stopping the machine. 2. Insert the chain into the end of the seam, using a hand sewing needle with large eye. 2. Raise the presser foot and the needles, then - Brother International 5234PRW | Users Manual - English and Spanish - Page 27
looper, right needle and then the left needle (to re-thread, see CHAPTER 3 "Threading"). Replace the material under the presser foot and sew 3-5 cm (1-1/8 to 2 inches) over the previous stitches. To use the stitch finger W When sewing stretch fabrics, using the included stitch finger W prevents the - Brother International 5234PRW | Users Manual - English and Spanish - Page 28
Two-thread sewing How to set the thread change assembly NOTE: Be sure to set the thread change assembly to the machine after completing the needle threading using the needle threader. (You cannot use the needle threader with the thread change assembly set to the machine.) 1. Turn off the machine for - Brother International 5234PRW | Users Manual - English and Spanish - Page 29
. NOTE: For the recommended thread and needle, see CHAPTER 4 "Sewing materials, threads, and needles comparison chart". 2. Thread the machine for a three thread overlock, using the right needle. 3. Remove the stitch finger . 1 Raise the presser foot lever. 2 Pull all threads toward the back of - Brother International 5234PRW | Users Manual - English and Spanish - Page 30
Narrow overlock stitch Underside of material Materials Top of material See CHAPTER 4 "Sewing materials, threads, and needles comparison chart". Top of material See CHAPTER 4 "Sewing materials, threads, and needles comparison chart". Needle thread Upper looper thread Lower looper thread Stitch - Brother International 5234PRW | Users Manual - English and Spanish - Page 31
English CHAPTER 6 TROUBLESHOOTING This sewing machine is designed for trouble-free operation. However, the following chart indicates trouble which may occur if basic adjustments are not made properly. Trouble 1. Does not feed 2. Needles break 3. Threads break 4. Skipped stitches 5. Stitches are - Brother International 5234PRW | Users Manual - English and Spanish - Page 32
fabric and thread with the included cleaning brush. Oiling For smooth and silent operation, the moving parts (indicated with arrows) of the machine should be oiled periodically. CAUTION Turn off the machine before opening the front cover and oiling. NOTE: Be sure to oil your sewing machine before - Brother International 5234PRW | Users Manual - English and Spanish - Page 33
off the machine while replacing the presser foot. Blind stitch foot Features When using the blind stitch presser foot (multi purpose foot), you can sew blind stitches and overlock at the same time. This is ideal when sewing cuffs, trouser bottoms, pockets, and hemming skirts etc. The stitch guide on - Brother International 5234PRW | Users Manual - English and Spanish - Page 34
looper adds an accent to your project. For thin fabrics, it's a good idea to choose a fine thread which will run smoothly. Procedure 1. Attach the blind stitch foot (see CHAPTER 1 "Attaching/Removing presser foot"). 2. Set up the machine for narrow overlock stitching. (Refer to CHAPTER 5 "Narrow - Brother International 5234PRW | Users Manual - English and Spanish - Page 35
3 thread overlock (Either needle can be used.) How to set the elastic / tape 14 5 2 3 1. Attach the taping foot (see CHAPTER 1 "Attaching/ Removing presser foot"). 2. Lift the presser foot lever. 3. Turn the hand wheel so that the line on the hand wheel is aligned to the line on the machine (see - Brother International 5234PRW | Users Manual - English and Spanish - Page 36
presser foot"). 3. Set up the machine for 3 thread overlock stitch with one needle in the left position. The right needle should be removed. 32 1 ~ 1.5mm 2 1 3 1. Fold the fabric according to the line for pearl fitting. 2. Place the fabric at needle dropping point keeping the folded edge with guide - Brother International 5234PRW | Users Manual - English and Spanish - Page 37
(pajamas, sports ware), cover for furniture, cushion, bag, etc. Preparation Attach the piping foot (see CHAPTER 1 "Attaching/ Removing presser foot"). Machine setting (type of stitch): - 2 needle 4 thread overlock - 1 needle 3 thread overlock (the right needle should be removed) How to adjust the - Brother International 5234PRW | Users Manual - English and Spanish - Page 38
. Preparation Attach the gathering foot (see CHAPTER 1 "Attaching/ Removing presser foot"). Machine setting (type of stitch): LG 4. Adjust the other settings to those used during normal overlock sewing. 5. Sew while keeping the fabric aligned with the fabric guide 3. - Adjust the size of - Brother International 5234PRW | Users Manual - English and Spanish - Page 39
stroke 25 mm (63/64 inch) Presser foot Free presser type Presser foot lift 5 mm to 6 mm (3/16 to 15/64 inch) Needle SCHMETZ 130/705H No. of needles and threads Two/Three/Four threads convertible Two needles or single needle Machine net weight 6 kgs. Machine dimensions 33.5 cm (W) x 29.8 cm (H) x 27 - Brother International 5234PRW | Users Manual - English and Spanish - Page 40
o cuando vaya a realizar cualquier tipo de ajuste de mantenimiento indicado en este manual de instrucciones. 16.Esta máquina de coser no ha sido diseñada para cose. No toque la ruedecilla, las agujas, las cuchillas ni otras partes móviles. 3. Desconecte la alimentación y desenchufe el cable en las - Brother International 5234PRW | Users Manual - English and Spanish - Page 41
. 3. No deje caer ni golpee la máquina. 4. Consulte siempre este manual antes de cambiar o ajustar el prensatelas, la aguja o cualquier otro elemento hayan recibido supervisión o instrucciones relativas al uso del aparato por parte de una persona responsable de su seguridad. Es necesario vigilar - Brother International 5234PRW | Users Manual - English and Spanish - Page 42
OVERLOCK Su máquina es de una eficacia y calidad excelentes; así pues, a fin de disfrutar completamente de todas las características incorporadas, le sugerimos que lea cuidadosamente el manual es importante mantener las aberturas de ventilación de la parte trasera y de los lados de la máquina sin - Brother International 5234PRW | Users Manual - English and Spanish - Page 43
IMPORTANTES DE SEGURIDAD I Contenido ...1 Capítulo 1: Nombres de las partes y sus funciones 2 Accesorios ...3 Encendido de la máquina 4 W 23 Puntada de dos hilos ...24 Puntada overlock estrecha/de dobladillo enrollado 25 Tabla de puntada overlock estrecha/de dobladillo enrollado 26 Capítulo 6: - Brother International 5234PRW | Users Manual - English and Spanish - Page 44
CAPÍTULO 1 NOMBRES DE LAS PARTES Y SUS FUNCIONES 1 2 1 Árbol del hilo 2 Tornillo de ajuste de de puntadas pueden guardarse en este compartimiento. (Véase el CAPÍTULO 5 "Puntada overlock estrecha/de dobladillo enrollada". Uñeta de puntadas, Uñeta de puntadas - Brother International 5234PRW | Users Manual - English and Spanish - Page 45
Español Accesorios Accesorios incluidos 1 Funda: X77871000 2 Bolsa de accesorios: 122991052 3 Pinzas: XB1618001 4 Malla para hilo (4): X75904000 5 Tope del carrete (4): X77260000 6 Cepillo limpiador: X75906001 7 Llave hexagonal: XB0393001 8 Juego de agujas (SCHMETZ 130/705H): X75917001 n° 80: 2 - Brother International 5234PRW | Users Manual - English and Spanish - Page 46
el prensatelas justo debajo del soporte del prensatelas de modo que el canal situado en la parte inferior del soporte del prensatelas quede alineado y atrape la barra de la parte superior del prensatelas . Después, baje la palanca del prensatelas para acoplarlo, oprimiendo el botón del - Brother International 5234PRW | Users Manual - English and Spanish - Page 47
Orificio de corte El orificio de corte opcional sostiene el hilo y el tejido cortado generados al coser. NOTA: Asegúrese de no perder el suplemento para la mesa extraído. 2. Coloque el tejido y comience a coser (véase el CAPÍTULO 5). Español Para instalar: Inserte el orificio de - Brother International 5234PRW | Users Manual - English and Spanish - Page 48
la puntada a un máximo de 4 mm. Marca de selección Ancho de las puntadas El ajuste normal del ancho de puntada para una puntada overlock corriente es de 5 mm. Para cambiar el ancho de puntada, gire el disco de ajuste del ancho de las puntadas. 1 3. Repliegue la cuchilla completamente - Brother International 5234PRW | Users Manual - English and Spanish - Page 49
para no deteriorar el material. Ajuste de la presión del prensatelas Gire el tornillo de ajuste de la presión situado en la parte superior izquierda de la máquina. Puede realizar el ajuste haciendo referencia al valor del tornillo. El ajuste normal es "2". 1 2 1 Menos presión 2 Más presi - Brother International 5234PRW | Users Manual - English and Spanish - Page 50
Disco de ajuste de la tensión Existe un disco de tensión para el hilo de cada aguja, el hilo del áncora superior y el del áncora inferior. La tensión de hilo correcta puede variar dependiendo del tipo y grosor del tejido así como del tipo de hilo utilizado. Ajustes de tensión del hilo pueden - Brother International 5234PRW | Users Manual - English and Spanish - Page 51
Tabla de ajuste de tensión de los hilos, dos agujas (cuatro hilos) A: Revés B: Derecho C: Hilo de la aguja izquierda D: Hilo de la aguja derecha E: Hilo del áncora superior F: Hilo del áncora inferior A C B El hilo de la aguja izquierda está suelto. Tense el hilo de la aguja izquierda ( - Brother International 5234PRW | Users Manual - English and Spanish - Page 52
Tabla de ajuste de tensión de los hilos, una aguja (tres hilos) A: Revés B: Derecho C: Hilo de las agujas D: Hilo del áncora superior E: Hilo del áncora inferior C A C B E El hilo de la aguja está suelto. Tense el hilo de la aguja (amarillo o verde). A D B El hilo de la aguja está tenso. - Brother International 5234PRW | Users Manual - English and Spanish - Page 53
OFF). 2. Gire la ruedecilla hasta que la línea de la misma queda alineada con la línea de la máquina. 3. Sujete la aguja con la parte plana alejada de usted e insértela hacia arriba hasta el tope. 4. Apriete firmemente el tornillo de instalación de la aguja girando la llave hexagonal incluida - Brother International 5234PRW | Users Manual - English and Spanish - Page 54
CAPÍTULO 2 PREPARACIÓN ANTES DEL ENHEBRADO Árbol del hilo Levante el árbol telescópico del hilo hasta su posición más alta. Compruebe que los portahilos quedan alineados sobre los portabobinas como se ilustra a continuación. 1 Portahilos en el árbol del hilo 2 Portabobinas 3 Posición correcta - Brother International 5234PRW | Users Manual - English and Spanish - Page 55
agujas y cuatro hilos 3 4 laegufjat nizqeueiedrdlae argiugjaht dneereechdale 1 2 3 4 6 7 5 7 Enhebrado para puntadas Overlock de una aguja y tres hilos (aguja derecha) 3 1 2 4 3 4 6 7 5 7 Español Enhebrado para puntadas Overlock de una aguja y tres hilos (aguja izquierda - Brother International 5234PRW | Users Manual - English and Spanish - Page 56
inscritos al lado de cada punto de enhebrado. 1 2 3 4 3 4 Enhebrado para puntadas Overlock de una aguja y dos hilos (aguja izquierda) 3 1 2 4 3 4 6 detrás a delante. 3. Pase el hilo por la guía de hilo 3 de la parte superior de la máquina. 4. Pase el hilo por el disco de tensión 4, que - Brother International 5234PRW | Users Manual - English and Spanish - Page 57
Español 5. Guíe el hilo por el canal y pase el hilo por los puntos de enhebrado 5678 situados al lado de las marcas de color azul siguiendo el orden numérico de la ilustración. NOTA: Asegúrese de enhebrar ambas tomas de hilo 7. Continúe con "Proceso simple de enhebrado del áncora inferior". Proceso - Brother International 5234PRW | Users Manual - English and Spanish - Page 58
7 1. Abra la tapa delantera deslizándola hacia la derecha y guiando la parte superior hacia usted. 2. Saque el hilo del carrete y póngalo directamente a trav detrás a delante. 3. Pase el hilo por la guía de hilo 3 de la parte superior de la máquina. 4. Pase el hilo por le disco de tensión 4, que - Brother International 5234PRW | Users Manual - English and Spanish - Page 59
Español PRECAUCIÓN · Antes del enhebrado apague la máquina por seguridad. · Gire la ruedecilla de forma que la marca de la misma quede alineada con la línea de la máquina (Véase el CAPÍTULO 1 "Cambio de la dirección de la ruedecilla"). Enhebrado de la aguja izquierda 1. Deslice el interruptor de - Brother International 5234PRW | Users Manual - English and Spanish - Page 60
muesca de la guía de hilo 3, y después tire firmemente del hilo desde la parte frontal e insértelo completamente en la ranura del disco de guía de hilo 4. través del prensatelas, y después saque unos 5 cm de hilo hacia la parte trasera de la máquina. 4 5cm 3 3. Corte el hilo con el cortador de hilo - Brother International 5234PRW | Users Manual - English and Spanish - Page 61
, HILOS Y AGUJAS DE COSTURA Tejido Tejidos finos: Georgette Lino Organdí Tricot Puntada Largo de las puntadas (mm) Hilo Aguja Puntada overlock 2,0 - 3,0 Hilo de hilvanar n° 80 - 90 Algodón n° 100 Filamento n° 80 - 100 SCHMETZ 130/705H n° 80 Tejidos finos: Georgette Lino Organdí Tricot - Brother International 5234PRW | Users Manual - English and Spanish - Page 62
aguja y dos hilos> · Ajuste de la tensión del hilo de la aguja a "2". · Ajuste de la tensión del hilo del áncora inferior a "6". (Véase "Tabla de puntada Overlock de dos hilos" de este capítulo para los detalles.) 2. Enhebre la máquina y saque todos los hilos unos 15 cm detrás del prensatelas. 20 - Brother International 5234PRW | Users Manual - English and Spanish - Page 63
3. Coloque un trozo de tejido debajo del prensatelas para realizar la costura de prueba. NOTA: Levante siempre el prensatelas antes de colocar el tejido debajo. No puede comenzar a coser simplemente colocando el tejido debajo del prensatelas sin elevarlo. Para empezar a coser 1. Enhebre la máquina - Brother International 5234PRW | Users Manual - English and Spanish - Page 64
, cosa una puntada fuera del tejido antes de detener la máquina. 2. Inserte la cadeneta en el final de la costura con una aguja de costura manual con un ojo grande. 2. Levante el prensatelas y las agujas, y dé la vuelta al tejido. 3. Remate la cadeneta con una gota de pegamento para tela y corte - Brother International 5234PRW | Users Manual - English and Spanish - Page 65
Español Si los hilos se rompen al coser Quite el tejido y vuelva a enhebrar en el orden correcto: Áncora inferior, áncora superior, aguja derecha y aguja izquierda (para volver a enhebrar, véase el CAPÍTULO 3 "Enhebrado"). Sustituya el tejido colocado bajo el prensatelas y cosa 3-5 cm sobre las - Brother International 5234PRW | Users Manual - English and Spanish - Page 66
áncora superior 4. Asegúrese de que la punta esté en el ojo del áncora superior. El ajuste del áncora ha finalizado. Tabla de puntada Overlock de dos hilos Largo de puntada 3 Ancho de puntada 5 - 7 Uñeta de puntadas Instalar Tensión del hilo Hilo de la aguja izquierda Para tejidos finos - Brother International 5234PRW | Users Manual - English and Spanish - Page 67
siempre de instalar una uñeta de puntadas antes de coser con puntadas Overlock normales. 5. Ajuste el ancho de las puntadas con el disco de 1 Levante la palanca del prensatelas. 2 Tire de todos los hilos hacia la parte trasera de la máquina. 3 Compruebe que el hilo no queda enrollado alrededor - Brother International 5234PRW | Users Manual - English and Spanish - Page 68
estrecha/de dobladillo enrollado Estilo de puntada Puntada de dobladillo enrollado Parte inferior del tejido Puntada overlock estrecha Parte inferior del tejido Tejidos Parte superior del tejido Véase el CAPÍTULO 4 "Tabla de relación entre los distintos tejidos, hilos y agujas de costura - Brother International 5234PRW | Users Manual - English and Spanish - Page 69
Español CAPÍTULO 6 GUÍA DE LOCALIZACIÓN DE PROBLEMAS Esta máquina de coser ha sido concebida para un funcionamiento sin problemas. Sin embargo, la siguiente tabla le indica los problemas que podrían presentarse si los ajustes básicos no fueron realizados correctamente. Problema Causa Remedio - Brother International 5234PRW | Users Manual - English and Spanish - Page 70
de tejido y los hilos con el cepillo limpiador que se incluye. Engrasado Para conseguir un funcionamiento suave y silencioso de la máquina, sus partes móviles (indicadas con flechas) se deberán engrasar periódicamente. PRECAUCIÓN Apague la máquina antes de abrir la tapa delantera y engrasar. NOTA - Brother International 5234PRW | Users Manual - English and Spanish - Page 71
que coordine con el tejido. Si se hace correctamente, esta puntada apenas se verá en el derecho del tejido. Puntadas overlock planas Las puntadas overlock planas se usan principalmente para lograr un acabado decorativo en un trabajo. Una vez terminadas, las puntadas pueden parecerse a una escalera - Brother International 5234PRW | Users Manual - English and Spanish - Page 72
Procedimiento 1. Conecte el prensatelas para puntadas invisibles (véase el CAPÍTULO 1 "Instalación/ desmontaje del prensatelas"). 2. Ajuste la máquina para puntada overlock de 3 hilos con una aguja en la posición izquierda. La aguja de la derecha se debe quitar. 3. Doble el tejido como se muestra en - Brother International 5234PRW | Users Manual - English and Spanish - Page 73
coser puños de camisas, escotes, etc. - overlock de 2 agujas y 4 hilos - overlock de 1 aguja y 3 hilos (se puede utilizar cualquier ranura 3. 6. Introduzca la cinta o el elástico 5 por la ranura 3 para que la parte derecha de las cintas o elásticos se ajuste a lo largo de la guía 4. 7. - Brother International 5234PRW | Users Manual - English and Spanish - Page 74
la cuchilla"). 2. Conecte el prensatelas para tira de perlas (véase el CAPÍTULO 1 "Instalación/ desmontaje del prensatelas"). 3. Ajuste la máquina para puntada overlock de 3 hilos con una aguja en la posición izquierda. La aguja de la derecha se debe quitar. 32 1 ~ 1.5mm 2 1 3 1. Doblar el tejido - Brother International 5234PRW | Users Manual - English and Spanish - Page 75
2. Ajuste el ancho de las puntadas de 5 a 6 mm 3. Ajuste la tensión de los hilos para puntadas overlock normales (véase el CAPÍTULO 5 "Selección de las distintas puntadas"). 3mm 3mm Cómo ajustar el tejido y la la cinta deberá fijarse después de recortar la parte sobrante. 5 ~ 6mm 5 ~ 6mm 33 - Brother International 5234PRW | Users Manual - English and Spanish - Page 76
ón/desmontaje del prensatelas"). Ajuste de la máquina (tipo de puntada): LG 4. Ajuste los demás parámetros a los que utiliza durante la costura overlock normal. 5. Cosa manteniendo el tejido alineado con la guía del tejido 3. - Cambie el tamaño de los frunces ajustando el largo de las puntadas - Brother International 5234PRW | Users Manual - English and Spanish - Page 77
Español ESPECIFICACIONES Especificaciones Uso Tejidos finos a gruesos Velocidad de costura 1.300 puntadas por minuto como máximo Ancho de las puntadas 2,3 mm a 7 mm Largo de las puntadas (altura) 2 mm a 4 mm Movimiento de la barra de las agujas 25 mm Prensatelas Tipo de prensatelas libre Elevación - Brother International 5234PRW | Users Manual - English and Spanish - Page 78
36 - Brother International 5234PRW | Users Manual - English and Spanish - Page 79
SETTING RECORD / NOTAS DE AJUSTES FABRIC TEJIDO THREAD HILO NEEDLE AGUJA THREAD TENSION TENSION DE HILO left right upper- lowerneedle needle looper looper aguja aguja áncora áncora izquier- derecha superior inferior da NOTE NOTA STITCH TYPE Tipo de puntada 37 - Brother International 5234PRW | Users Manual - English and Spanish - Page 80
XB2006001 Printed in Taiwan
HANDBOOK FOR COMPACT
OVERLOCK MACHINE
MANUAL DE INSTRUCCIONES DE LA
MAQUINA COMPACTA OVERLOCK
English
Español
Product Code: 884-B01
Please visit us at
where you can get product support and answers to
frequently asked questions (FAQs).
Visítenos en
donde hallará consejos para la solución de problemas
así como la lista de preguntas y respuestas más
frecuentes.