Brother International 5234PRW Users Manual - English and Spanish - Page 16
Preparation Before Threading
View all Brother International 5234PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CHAPTER 2 PREPARATION BEFORE THREADING Thread tree Raise the telescoping thread tree to its highest position. Make sure that the thread holders are in alignment above the spool pins as illustrated below. 1 Thread holder on thread tree 2 Spool pin 3 Correct position Before threading 1. Turn off the main power and light switch for safety. 1 3 2. Raise the presser foot using presser foot lever. 2 How to use the thread spool cap When using sewing thread spools, the thread spool cap should be used as illustrated below. Make sure that the spool notch is on the bottom. 1 Thread spool cap How to use the thread net If you are sewing with loosely spun nylon thread, we recommend that you cover the spool with the net supplied to prevent the thread from slipping off the spool. Adapt the net to the shape of the spool. 3. Turn the hand wheel so that the mark on the hand wheel is aligned to the line on the machine. (See CHAPTER 1 "Turning direction of hand wheel".) 12