Brother International BAS-300G Instruction Manual - English - Page 40
Setting the work clamp lift amount, USING THE OPERATION PANEL BASIC OPERATIONS
View all Brother International BAS-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 5-7. Setting the work clamp lift amount The setting for the work clamp lift amount can be changed using the operation panel. * For pneumatic work clamp specifications, only threading mode and intermittent presser foot height setting mode will be available. 1 All indicators switch off Press the THREAD/CLAMP key. The sewing machine will switch to threading mode. • " 1" will appear in the PROGRAM No. display, and the work clamp will drop. THREAD/CLAMP indicator illuminates MENU indicator switches off 4445Q 2 Motor-driven work clamp specifications only Press the key. The sewing machine will switch to work clamp height setting mode. • " 2" will appear in the PROGRAM No. display, and the work clamp will rise to the setting value that appears in the menu display. (Work clamp height setting: 15 − 25) Press the or key to set the work clamp height. • The work clamp will rise or drop to the height of the new value that has been set. When memory switch No. 003 is set to "2" 5224Q Press the key. The sewing machine will switch to intermediate work clamp height setting mode. • " 3" will appear in the PROGRAM No. display, and the work clamp will move to the setting value that appears in the menu display. (Intermediate work clamp height setting: 1 − 15) Press the or key to set the intermediate work clamp height. • The work clamp will rise or drop to the height of the new value that has been set. NOTE: When setting the work clamp height and the intermediate presser foot work clamp height, check that the slider (1) is touching the work clamp lifter plate assembly (2). 4959Q 5254Q 31 BAS-300G, BAS-311G, BAS-326G