Brother International BAS-311F-L Programmer Instruction Manual - English - Page 180
Creating split data, Creating magnified data, Input for magnification x5
View all Brother International BAS-311F-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
3. Input command depending on the feed. Press if not specified. Chapter 3 Programming with Command Function Creating split data Command to be used Stopping the needle at the upper end for the split. Stopping the needle at the lower end for the split. 1. Input command depending on the split. Creating magnified data Command to be used Input for magnification (x2) Input for magnification (x5) Input for magnification (x10) The following three scales are available for magnification: x2, x5, and x10. Use a pattern sheet suitable for the magnified pattern. The magnified data is reduced when the end code is input. 1. Make sure that the needle is at the home position. Press if not specified. 2. Select magnification and press . Programmer 179
Programmer
179
Chapter 3 Programming with Command Function
3.
Input command depending on the feed.
Press
if not specified.
Creating split data
Command to be used
Stopping the needle at the upper end for the split.
Stopping the needle at the lower end for the split.
1.
Input command depending on the split.
Creating magnified data
Command to be used
Input for magnification (x2)
Input for magnification (x5)
Input for magnification (x10)
The following three scales are available for magnification: x2, x5, and x10.
Use a pattern sheet suitable for the magnified pattern.
The magnified data is reduced when the end code is input.
1.
Make sure that the needle is at the home position.
Press
if not specified.
2.
Select magnification and press
.