Brother International BAS-311F-L Programmer Instruction Manual - English - Page 76
the needle point is at point B of the pattern., coordinates recorded in step 6.
View all Brother International BAS-311F-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
2. Press and press . The work clamp moves to point A. 3. Press . 4. Select with and press . Chapter 2 Programming with Help Function 5. Select with and press . 6. Move the work clamp with so that the needle point is at point B of the pattern. Record the coordinates (values of X and Y). Do not press . 7. Press three times. The needle point returns to the home position. 8. Select with and press . 9. Press and press . The work clamp moves to point C. 10. Press . 11. Select with and press . 12. Select with and press . 13. Move the work clamp with coordinates recorded in step 6. for the 14. Turn the pulley with a hand and put a marking with the needle to indicate the position of point D. Programmer 75
Programmer
75
Chapter 2 Programming with Help Function
2.
Press
and press
.
The work clamp moves to point A.
3.
Press
.
4.
Select
with
and press
.
5.
Select
with
and press
.
6.
Move the work clamp with
so that
the needle point is at point B of the pattern.
Record the coordinates (values of X and Y). Do not
press
.
7.
Press
three times.
The needle point returns to the home position.
8.
Select
with
and press
.
9.
Press
and press
.
The work clamp moves to point C.
10. Press
.
11. Select
with
and press
.
12. Select
with
and press
.
13. Move the work clamp with
for the
coordinates recorded in step 6.
14. Turn the pulley with a hand and put a marking
with the needle to indicate the position of point
D.