Brother International BAS-326G Instruction Manual - English
Brother International BAS-326G Manual
View all Brother International BAS-326G manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BAS-326G manual content summary:
- Brother International BAS-326G | Instruction Manual - English - Page 1
BAS-300G BAS-311G BAS-326G INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. DIRECT DRIVE PROGRAMMABLE ELECTRONIC PATTERN SEWER - Brother International BAS-326G | Instruction Manual - English - Page 2
very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the - Brother International BAS-326G | Instruction Manual - English - Page 3
and their meanings This instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents , the symbol at left means "you must make the ground connection".) BAS-300G, BAS-311G, BAS-326G i - Brother International BAS-326G | Instruction Manual - English - Page 4
problems with correct operation. Installation Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine reach of children. ii BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 5
positions and check that they operate correctly before using the machine. To prevent accidents and problems, do not modify the machine yourself. Brother will not be held responsible for any accidents or problems resulting from modifications made to the machine. BAS-300G, BAS-311G, BAS-326G iii - Brother International BAS-326G | Instruction Manual - English - Page 6
sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother problems with correct operation may also occur. 5 Direction of operation iv BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 7
Motor cover Tension release solenoid cover Inner cover L Outer cover Fixed cover L Motor cover L Eye guard Finger guard Thread take-up cover Inner cover R Outer cover Fixed cover R Motor cover R Gas spring support cover 2960B BAS-300G, BAS-311G, BAS-326G 2961B v - Brother International BAS-326G | Instruction Manual - English - Page 8
46 7. USING CF CARDS 47 7-1. Notes on handling CF cards (sold separately) ...47 7-2. Structure of a CF card folder 47 7-3. Data read/write mode 48 7-3-1. Reading all sewing data from the CF card at once 49 7-3-2. Writing all sewing data to the CF card at once 50 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 9
8. SEWING 51 8-1. Sewing 51 8-2. Using the STANDARD ADJUSTMENTS 55 10-1. Checking the machine head switch 55 10-2. Thread take-up spring 56 10-3. Arm thread guide R 56 10-4. Adjusting the needle OF ERROR CODES 67 12. TROUBLESHOOTING 71 13. 7-SEGMENT DISPLAY 74 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 10
1. NAMES OF MAJOR PARTS 1. NAMES OF MAJOR PARTS Two-pedal foot switch (1) Power switch (2) Control box (3) CF slot (4) Operation panel (5) Foot switch (motor-driven work clamp specifications) (6) Work clamp switch (pneumatic work clamp - Brother International BAS-326G | Instruction Manual - English - Page 11
SPECIFICATIONS 2. SPECIFICATIONS 2997B Sewing machine Lock stitch pattern tacking sewing machine (with large shuttle hook) Stitch formation Single needle lock stitch Max. sewing speed 2,700 sti/min Max. sewing area (XxY) BAS-300G: 130 x 60 mm BAS-311G: 130 x 100 mm BAS-326G: 220 x 100 mm - Brother International BAS-326G | Instruction Manual - English - Page 12
Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine head weighs approximately shock, and problems with correct operation may also occur. Install the safety covers to the machine head and motor. 3 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 13
least 10 mm away from the leg. If the control box and the leg are too close together, it may result in incorrect sewing machine operation. Only the holes for installing the operation panel and the hole for the cord differ from the above diagram. Refer to the - Brother International BAS-326G | Instruction Manual - English - Page 14
the oil pan. (Refer to "3-7. Installing the treadle unit (motor-driven work clamp specifications)".) (1) Oil pan (2) Nails [7 pcs.] (3) Rubber cushions [4 pcs.] (4) Waste oil tank 4911Q 5 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 15
the machine head, do not hold it by the pulse motor. This may cause problems with operation of the pulse motor. 2966B (4) Hinge holders [2 pcs.] (5) Bolts [4 pcs.] (6) Plain washers [4 pcs.] (7) Nuts [4 pcs.] (8) Head rest (9) Bolts with washer [4 pcs.] 4913Q BAS-300G, BAS-311G, BAS-326G 6 - Brother International BAS-326G | Instruction Manual - English - Page 16
looking from the front of the sewing machine (the direction of the arrow in the illustration), and then gently tilt back the machine head. NOTE: Two or more people should tilt back the machine head, and it should be tilted gently while being held with both hands. 2969B BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 17
places marked with * are also used to install the treadle unit. (Refer to "3-7. Installing the treadle unit (motor-driven work clamp specifications)".) (29) Gas spring support cover (30) Bolts with washer [6 pcs.] 4916Q BAS-300G, BAS-311G, BAS-326G 8 - Brother International BAS-326G | Instruction Manual - English - Page 18
head towards you. NOTE: Always be sure to move the work clamp arm (1) all the way to the right before tilting back the machine head. If you try to tilt back the machine head while the work clamp arm (1) is still on the left side, it may damage the outer cover L (2). 9 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 19
the table into the control box through the hole in the side of the control box. (6) Staples [3 pcs.] (1) Operation panel base (2) Cushion A (3) Plain washers (medium) [3 pcs.] (4) Bolts [3 pcs.] (5) Cushions B [3 pcs.] (6) Plain washers (large) [3 pcs.] (7) Nuts - Brother International BAS-326G | Instruction Manual - English - Page 20
, and when the start switch (right) is depressed, the sewing machine starts sewing. * The work clamp lowering method can be changed using memory switch No. 002. (Refer to "6-3. List of memory switch settings.") 2972B Work clamp switch (2-step) Start switch 4923Q 11 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 21
(Refer to "3-10. Connecting the ground wire".) 3. INSTALLATION 1. Gently tilt back the machine head. 2. Pass the cord bundle through the hole in the work table. 3. Loosen (3) (3) (3) (3) (3) (4) (4) (4) (4) P7 (PRG) (3) P3(CUTTER) - (Continued on next page) BAS-300G, BAS-311G, BAS-326G 12 - Brother International BAS-326G | Instruction Manual - English - Page 22
PCB> Press the tab. 1843B Connector Machine head memory 7-pin Upper shaft motor 3-pin Synchronizer 14-pin Connector Work /cable tie (4) (5) (5), (6) Cable tie (5), (6) (5), (6) (5), (6) (5), (6) (5), (6) (Continued on next page) 13 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 23
receiving a serious electric shock, and problems with correct operation may also occur. (1) Ground wire from upper shaft motor harness (2) Ground wire from the machine head (3) Ground wire from operation panel connections are secure in order to ensure safety. 2973B BAS-300G, BAS-311G, BAS-326G 14 - Brother International BAS-326G | Instruction Manual - English - Page 24
phase power. NOTE: Do not use an extension cord. If this is not observed, it may cause problems with correct operation. Green and yellow wire (ground wire) Green and yellow wire ( nut (3) so that the cotton stand does not move. 2974B 15 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 25
to the position with the corresponding number. 1904B Cylinder R Cylinder L Upper knob Lower knob Manual button You can use the valve knobs to adjust the lifting the power is turned off by pressing the manual button. 5220Q 1905B BAS-300G, BAS-311G, BAS-326G 16 - Brother International BAS-326G | Instruction Manual - English - Page 26
. Installing the eye guard CAUTION Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. (1) Screw ( NOTE: Be careful not to clamp the cords when installing the motor cover. 2976B 17 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 27
the lubricating oil specified by Brother. * If this type of lubricating oil is difficult that the machine may seize during operation. ・ BAS-300G-03[] ・ BAS-311G ・ BAS-326G ・ BAS-300G-01[] ・ BAS-300G-02[] - Brother International BAS-326G | Instruction Manual - English - Page 28
machine head fixing bolt When transporting the sewing machine, secure the machine head to the table with the machine head fixing bolt. (1) Plain washer (2) Machine head fixing bolt NOTE: When operating the sewing machine, remove the machine head fixing bolt. 5021Q 19 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 29
the needle. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. 1. Loosen the set screw parts> BAS-300G-03[], BAS-311G, BAS-326G BAS-300G-01[], 02[] Thread the upper thread 2370B Needle cooler 2978B • Turn the machine - Brother International BAS-326G | Instruction Manual - English - Page 30
Threading mode> Threading mode is safe because the sewing machine will not start even when the foot switch is depressed. 1 Turn on the power switch. 2 All will return to where it was before threading mode was started. THREAD/CLAMP indicator switches off 21 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 31
4. PREPARATION BEFORE SEWING Do not touch any of the moving parts or press any objects against the machine while winding the lower thread. Injury or damage to the sewing machine may result. tension assembly (8) down, and for case B, move it upward. For case B BAS-300G, BAS-311G, BAS-326G 22 - Brother International BAS-326G | Instruction Manual - English - Page 32
power switch before installing the bobbin case. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. 2534Q 30mm 4945Q 1. Pull the shuttle race cover (1) insert the bobbin case into the rotary hook. 2535Q 23 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 33
similar Seatbelt (-03[]) #4 or similar Lower thread Upper thread tension (N) Lower thread tension (N) Pre-tension (N) Needle Normal sewing speed #20 or similar 1.4 − 1.8 0.1 − 0.6 DP x 17 #19 2,000 sti/min 0.2 − 0.3 mm. Stronger Weaker Stronger Weaker 2153B BAS-300G, BAS-311G, BAS-326G 24 - Brother International BAS-326G | Instruction Manual - English - Page 34
(6).) The sewing machine will move to the home position and the work clamp will rise. * For programs with a sewing start position. NOTE: If error "E110" appears when the foot switch is depressed, turn the pulley (1) in the direction of operation to clear the error. BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 35
when the power is turned on. (2) CAUTION indicator Illuminates when an error occurs. (3) RESET key Used to reset errors. (4) TEST key Used to start test mode. (5) TEST indicator Illuminates pressed to shown the Y-scale setting. 4435Q (Continued on next page) BAS-300G, BAS-311G, BAS-326G 26 - Brother International BAS-326G | Instruction Manual - English - Page 36
the power is turned on. [Option compatibility] (22) Function keys [F1, F2, F3, F4] Used to select user programs and to set and select cycle programs. (23) R/W key Used to read data from and write data to external media. CFTM is a trademark of SanDisk Corporation. 27 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 37
position and the program number will be accepted. • The program number will stop flashing and illuminate steadily. NOTE: After completing the setting, be sure to refer to "5-6. Checking the sewing pattern" to check that the needle drop position is correct. 4954Q BAS-300G, BAS-311G, BAS-326G 28 - Brother International BAS-326G | Instruction Manual - English - Page 38
mm. 2. Press the or key (5) to set the scale (0 − 400). • The program number will flash in the PROGRAM No. display (6). 3. Depress the foot switch to the 2nd step. (If using a 2. Press the or key (4) to set the sewing speed. (Sewing speed setting: 400 − 2700) 4956Q 29 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 39
• The feed mechanism will move to the home position and the program number will stop flashing and illuminate steadily. • The number of sewing will start. (If using a two-pedal foot switch, depress the start switch.) 4441Q Press the TEST key. TEST indicator switches off BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 40
. 003 is set to "2" 5224Q Press the key. The sewing machine will switch to intermediate work clamp height setting mode. • " 3" will appear in the PROGRAM No. display, and the work clamp will move to the the work clamp lifter plate assembly (2). 4959Q 5254Q 31 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 41
) 3 Press the key. The sewing machine will switch to intermittent presser foot height setting mode. • " 4" will appear in the PROGRAM No. display, and the work clamp will rise . Changing the intermittent stroke" when making the adjustment. 5033Q BAS-300G, BAS-311G, BAS-326G 32 - Brother International BAS-326G | Instruction Manual - English - Page 42
the production counter". 4 When SPEED indicator is illuminated Production counter temporary display function Refer to "6-5. Using the production counter". 5 User program setting mode Refer to "6-7. Using user programs". 33 BAS-300G, BAS-311G, BAS-326G 4488Q 4489Q 4490Q 4491Q 4492Q 4493Q - Brother International BAS-326G | Instruction Manual - English - Page 43
key simultaneously. • The memory switch number will appear in the PROGRAM No. display, and its setting value will appear in the TEST key. • The changes will be memorized and the sewing machine will switch to home position detection standby. TEST indicator switches BAS-300G, BAS-311G, BAS-326G 34 - Brother International BAS-326G | Instruction Manual - English - Page 44
(split menu is disabled before split detection) 1 Continuous split (split menu is always enabled) 2 Independent split * The mm display may differ slightly from the actual sewing size. Initial value ON 0 2 OFF OFF OFF OFF OFF OFF 0 35 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 45
program number being displayed will be stored, and you can set the lower thread counter separately for each item of sewing thread counter reaches "0000", the buzzer will sound continuously. The sewing machine will not operate during this time, even if the foot switch BAS-300G, BAS-311G, BAS-326G 36 - Brother International BAS-326G | Instruction Manual - English - Page 46
1. 2. While the key (3) is being pressed, the first three digits will appear in the PROGRAM No. display (4) so that the total number of digits displayed will be seven. 3. If you press menu display. * You can start sewing while the temporary display still appears. 37 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 47
mode is always enabled) • Sewing is carried out each time in the order of steps 1 → 2 → 3 → 1 (for example, if there are two sections of split data). [Independent split] Memory switch No. 403 = 2 • The pattern for the displayed split number is sewn independently. BAS-300G, BAS-311G, BAS-326G 38 - Brother International BAS-326G | Instruction Manual - English - Page 48
user program. User programs are enabled when memory switch no. 400 is set to "ON". 1 Select a user program sewing speed. Press the SELECT key. 4472Q Press the recorded. SPEED indicator flashes or key to set the sewing speed to be 4474Q 39 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 49
TEST key. 4970Q This completes the recording of a user program. • The user program number will flash in the PROGRAM No. display, and the sewing machine will switch to home position detection standby. TEST indicator switches off, MENU indicator illuminates BAS-300G, BAS-311G, BAS-326G 4971Q 40 - Brother International BAS-326G | Instruction Manual - English - Page 50
cleared. Clearing all user programs Press and hold the RESET key for 2 seconds or more. • The buzzer will sound and all user programs will be cleared. NOTE: If any cycle programs have been memorized, all of the memorized cycle programs will also be cleared. 41 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 51
1. 2. Press the SELECT key until the desired step is reached. 1. Press the or key to switch the cycle program number. 2. Select the desired cycle program number again, and then press the SELECT key until the desired step is reached. BAS-300G, BAS-311G, BAS-326G 42 - Brother International BAS-326G | Instruction Manual - English - Page 52
cannot be changed at this time. NOTE: If cycle program sewing mode is active (when memory switch no. 401 is "ON") but no cycle programs have been recorded, the user programs will be sewn in numeric order. "C-0" will appear in the PROGRAM No. display at this time. 43 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 53
cycle program numbers. U1 to U4 and C-1 to C-4 can be selected using function keys F1 to F4. U5 to U10 and C-5 to C-9 can be selected by simultaneously pressing combinations of function keys F1 to F4 (addition). U5/C-5 U6/C-6 U7/C-7 Or Or Or U8/C-8 U9/C-9 U10 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 54
mechanism will not move to a position that would move the sewing pattern outside the sewing area. • If you change the program number, X-scale or Y-scale settings, the amount of movement be reset. (Refer to the service manual for details on memory switch No. 465.) 45 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 55
) If the sewing machine stops operating normally sewing programs, memory switches, user programs, cycle programs and expansion option output data) Clearing user programs and cycle programs Clearing expansion option output data * Refer to the instruction manual BAS-300G, BAS-311G, BAS-326G 46 - Brother International BAS-326G | Instruction Manual - English - Page 56
changing the setting for memory switch No. 752 in order to change the folder name. Change the folder name if you would like to store sewing data for different sewing machines on a single CF card. (Refer to the service manual for details on memory switch No. 752.) 47 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 57
, press the R/W key. • The mode number will appear in the PROGRAM No. display, and the setting details for that mode will appear in the menu display. • The initial mode is sewing data reading mode. (Refer to the read/write mode list) TEST indicator and CF media indicator illuminate 4574Q 4 Press - Brother International BAS-326G | Instruction Manual - English - Page 58
be used with this sewing machine is data that has been created for the BAS-300G series. *2 Only valid when using an optional floppy disk drive. *3 Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read. *4 Refer to the instruction manual for the programmer for details - Brother International BAS-326G | Instruction Manual - English - Page 59
key, the display will change back to [ ALL]. Writing 4977Q Press the TEST key. Turn off the power switch, remove the CF card, and then close the cover of the CF slot. TEST indicator switches off Refer to the service manual for details on other read/write modes. BAS-300G, BAS-311G, BAS-326G 50 - Brother International BAS-326G | Instruction Manual - English - Page 60
machine. 8-1. Sewing 4978Q 1. Turn on the power switch. 2. Press the or key (1) to select the sewing program number that you would like to use. * Refer to "5-2. Loading sewing data" for details on reading sewing data the work clamp and feed plate from being slippery. BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 61
step. (If using a two-pedal foot switch, depress the start switch.) • The sewing machine will start operating and sewing will start. 4441Q 8-3. Using the thread wiper switch The thread wiper switch (1) can be used to turn the thread wiper (2) on and off. 4983Q BAS-300G, BAS-311G, BAS-326G 52 - Brother International BAS-326G | Instruction Manual - English - Page 62
switch before carrying out cleaning. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. Be sure to wear protective goggles and driver (4), the top of the rotary hook thread guide and the shuttle race. 4986Q 53 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 63
. 9-5. Checking the needle 2208B Always check that the tip of the needle is not broken and also that the needle is not bent before starting sewing. 2372B 9-6. Lubrication Lubricate the sewing machine while referring to "3-16. Lubrication". BAS-300G, BAS-311G, BAS-326G 54 - Brother International BAS-326G | Instruction Manual - English - Page 64
correctly before using the machine. 10-1. Checking the machine head switch Check that the machine head switch is turned on as shown in the illustration. NOTE: If the machine head switch is not turned on, errors "E050", "E051" and "E055" will be generated. 5226Q 55 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 65
guide R (1) to adjust. * When sewing heavy material, move arm thread guide R (1) to the left. (The thread take-up amount will become greater.) * When sewing light material, move arm thread guide R (1) to the right. (The thread take-up amount will become less.) 5030Q BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 66
it does not cross the needle at all, the tip of the rotary hook will interfere with the needle and skipped stitches may occur. 57 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 67
hook is 0.01 to 0.08 mm. 10-8. Adjusting the shuttle race thread guide 3574Q Install the shuttle race thread guide (1) by pushing it in the direction of the arrow so that the needle is turned counterclockwise, the lubrication amount becomes greater. Aligned 4996Q BAS-300G, BAS-311G, BAS-326G 58 - Brother International BAS-326G | Instruction Manual - English - Page 68
side of thread trimmer cam> Reverse position 5255Q 5233Q 1. Open the top cover and tilt back the machine head. 2. Turn the pulley (1) by hand in the direction of the arrow to move the needle bolt (7), check the above position once more. (Continued on next page) 59 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 69
there is a gap of about 0 - 1 mm between the outside of the hole in the movable knife (8) and the ridge line on the shuttle race thread guide (12) when there is still play between the parts. BAS-300G, BAS-311G, BAS-326G 60 - Brother International BAS-326G | Instruction Manual - English - Page 70
knife connecting plate (13), and install it to the needle plate (5). 8. Check that the needle is aligned with the center of the needle hole. 61 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 71
: Install the feed plate so that the surface with the index mark is facing upward. 2373B 4 End feed plate installation mode Turn off the power. BAS-300G, BAS-311G, BAS-326G 62 - Brother International BAS-326G | Instruction Manual - English - Page 72
the screw (2) so that the distance from the bottom of the presser foot to the top of the needle plate is 22 mm when the sewing machine is stopped and the presser foot (1) is raised. 5031Q 63 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 73
will as given in the following table. Installation position Intermittent stroke range A 2 − 4.5mm B 4.5 − 10mm C 0 mm (Intermittent presser foot does not move up and down) 5012Q BAS-300G, BAS-311G, BAS-326G 64 - Brother International BAS-326G | Instruction Manual - English - Page 74
turn the bolt (6) until it is pressing against the intermittent drive lever (7), and then adjust until the two points mentioned above are not touching. 65 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 75
of the regulator (1), turn the drain cock (3) in the direction indicated by an arrow to drain the water. NOTE: Open the air cock (4) slowly. 1912B BAS-300G, BAS-311G, BAS-326G 66 - Brother International BAS-326G | Instruction Manual - English - Page 76
in severe injury. If a malfunction should occur with the sewing machine, a buzzer will sound and an error code will appear in the display window. Follow the remedy procedure to eliminate the cause of the problem. Switch-related errors Code Cause and remedy E010 Stop switch was pressed. Press - Brother International BAS-326G | Instruction Manual - English - Page 77
problem during test feeding. Turn off the power, and then check if there are any problems in the Y-feed direction. E217 Y-feed motor stopped due to a problem during programming. Turn off the power, and then check if there are any problems in the Y-feed direction. BAS-300G, BAS-311G, BAS-326G 68 - Brother International BAS-326G | Instruction Manual - English - Page 78
and then turn it back on again. E452 Machine head memory is not connected. Turn off the power, and then check that connector P3 on the power supply motor PCB is properly connected. E474 Internal memory is full and copying is not possible. Clear the sewing data. 69 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 79
the cooling fan is blocked with scraps of thread. Check that connector P22 on the main PCB is properly connected. If an error code that is not listed above appears or if carrying out the specified remedy does not solve the problem, contact the place of purchase. BAS-300G, BAS-311G, BAS-326G 70 - Brother International BAS-326G | Instruction Manual - English - Page 80
. CAUTION Turn off the power switch and disconnect the power cord before carrying out troubleshooting. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. Problem Cause Remedy Reference Work clamp does not lift. Work clamp does not drop - Brother International BAS-326G | Instruction Manual - English - Page 81
suitable for the sewing conditions. Thread take-up spring tension and Adjust the tension and height of the height are incorrect. thread take-up spring. Needle and incorrect. rotary hook timing is Adjust the needle bar lift amount. P. 24 P. 24 P. 56 P. 57 BAS-300G, BAS-311G, BAS-326G 72 - Brother International BAS-326G | Instruction Manual - English - Page 82
12. TROUBLESHOOTING Problem Cause Upper thread is not machine head switch cord is disconnected. Adjust the position of the machine head switch. If the machine head switch is malfunctioning, replace it with a new one. P. 24 P. 56 P. 56 P. 56 P. 24 P. 61 P. 12 P. 9 73 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Instruction Manual - English - Page 83
13. 7-SEGMENT DISPLAY 13. 7-SEGMENT DISPLAY 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z BAS-300G, BAS-311G, BAS-326G 74 - Brother International BAS-326G | Instruction Manual - English - Page 84
* Please note that the contents of this manual may differ slightly from the actual product purchased as a result of product improvements. © 2005, 2008, 2010, 2011 Brother Industries, Ltd. All Rights Reserved. This is the original instructions. BAS-300G, 311G, 326G SA6236-401 E 2011.03. B (1)
BAS-300G
BAS-311G
BAS-326G
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
DIRECT DRIVE
PROGRAMMABLE ELECTRONIC PATTERN SEWER
INSTRUCTION MANUAL