Brother International BAS-326G Instruction Manual - English - Page 44
List of memory switch settings - service manual
View all Brother International BAS-326G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 6-3. List of memory switch settings No. Setting range Setting items Work clamp lift timing after sewing is completed 001 OFF Lifts at the final stitch position. ON Lifts after moving to the sewing start position. Separate-type work clamp drop operation (pneumatic work clamp specifications) 002 0 Left and right work clamp drop at the same time. 1 Work clamp drops in the order left → right. 2 Work clamp drops in the order right → left. Work clamp drop operation (motor-driven work clamp specifications) 0 Analog dropping: Work clamp drops in direct proportion to the pedal depression amount, and sewing starts when the pedal is fully depressed 003 1 1st step drop: Work clamp drops when the pedal is depressed to the 1st step, and sewing starts when the pedal is depressed to the 2nd step 2nd step drop: Work clamp drops to intermediate height when the pedal is 2 depressed to the 1st step, and work clamp drops and sewing starts when the pedal is depressed to the 2nd step. Sewing start speed The sewing speed for the first 1 − 5 stitches is set by memory switch numbers 151 100 OFF − 155. (Refer to the service manual for details of memory switch Nos. 151 − 155.) ON 1st stitch at 400 sti/min, 2nd stitch at 400 sti/min, 3rd stitch at 600 sti/min, 4th stitch at 900 sti/min, 5th stitch at 2,000 sti/min Single-stitch test feed OFF Test feed starts when the foot switch (start switch) is depressed, and it continues automatically until the final stitch. Test feed is carried out one stitch at a time when the foot switch (start switch) is 200 depressed (feed becomes continuous if the foot switch [start switch] is ON continuously depressed). In addition, when the TEST indicator is illuminated, test feeding will move forward one stitch at a time when the machine pulley is turned by hand. Production counter display 300 OFF Lower thread counter display ON Production counter display User programs 400 OFF Disabled ON User program mode is enabled. Cycle programs 401 OFF Disabled ON When sewing user programs, the set programs are sewn in numeric order. Maximum reduction ratio (mm display) (*) 402 OFF Displayed as %. ON Displayed as mm. Split mode selection 403 0 Continuous split (split menu is disabled before split detection) 1 Continuous split (split menu is always enabled) 2 Independent split * The mm display may differ slightly from the actual sewing size. Initial value ON 0 2 OFF OFF OFF OFF OFF OFF 0 35 BAS-300G, BAS-311G, BAS-326G