Brother International BAS-326G Basic Instruction Manual - English
Brother International BAS-326G Manual
View all Brother International BAS-326G manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BAS-326G manual content summary:
- Brother International BAS-326G | Basic Instruction Manual - English - Page 1
BAS-300G BAS-311G BAS-326G Basic Operation Manual DIRECT DRIVE PROGRAMMABLE ELECTRONIC PATTERN SEWER Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. This basic operation manual describes basic operations including sewing machine - Brother International BAS-326G | Basic Instruction Manual - English - Page 2
very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the - Brother International BAS-326G | Basic Instruction Manual - English - Page 3
and their meanings This instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents , the symbol at left means "you must make the ground connection".) BAS-300G, BAS-311G, BAS-326G i - Brother International BAS-326G | Basic Instruction Manual - English - Page 4
problems with correct operation. Installation Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine reach of children. ii BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 5
positions and check that they operate correctly before using the machine. To prevent accidents and problems, do not modify the machine yourself. Brother will not be held responsible for any accidents or problems resulting from modifications made to the machine. BAS-300G, BAS-311G, BAS-326G iii - Brother International BAS-326G | Basic Instruction Manual - English - Page 6
sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother problems with correct operation may also occur. 5 Direction of operation iv BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 7
Motor cover Tension release solenoid cover Inner cover L Outer cover Fixed cover L Motor cover L Eye guard Finger guard Thread take-up cover Inner cover R Outer cover Fixed cover R Motor cover R Gas spring support cover 2960B BAS-300G, BAS-311G, BAS-326G 2961B v - Brother International BAS-326G | Basic Instruction Manual - English - Page 8
sewing speed 28 5-6. Checking the sewing pattern 29 5-7. Setting the work clamp lift amount 30 5-8. Notes on handling CF cards (sold separately) ...32 6. SEWING 33 6-1. Sewing 33 6-2. Using the STOP switch 34 6-3. Using the thread wiper switch 34 Document CD 36 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 9
1. NAMES OF MAJOR PARTS 1. NAMES OF MAJOR PARTS Two-pedal foot switch (1) Power switch (2) Control box (3) CF slot (4) Operation panel (5) Foot switch (motor-driven work clamp specifications) (6) Work clamp switch (pneumatic work clamp - Brother International BAS-326G | Basic Instruction Manual - English - Page 10
the sewing machine will not start even when the foot switch is depressed. Presser foot height can be set easily using the panel Page 30 INSTRUCTION MANUAL CD 6-7. Using user programs The an intermediate position B, then drops to the lowest position C. 5029Q 2 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 11
Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine head weighs approximately shock, and problems with correct operation may also occur. Install the safety covers to the machine head and motor. BAS-300G, BAS-311G, BAS-326G 3 - Brother International BAS-326G | Basic Instruction Manual - English - Page 12
least 10 mm away from the leg. If the control box and the leg are too close together, it may result in incorrect sewing machine operation. Only the holes for installing the operation panel and the hole for the cord differ from the above diagram. Refer to the - Brother International BAS-326G | Basic Instruction Manual - English - Page 13
the oil pan. (Refer to "3-7. Installing the treadle unit (motor-driven work clamp specifications)".) (1) Oil pan (2) Nails [7 pcs.] (3) Rubber cushions [4 pcs.] (4) Waste oil tank 4911Q BAS-300G, BAS-311G, BAS-326G 5 - Brother International BAS-326G | Basic Instruction Manual - English - Page 14
the machine head, do not hold it by the pulse motor. This may cause problems with operation of the pulse motor. 2966B (4) Hinge holders [2 pcs.] (5) Bolts [4 pcs.] (6) Plain washers [4 pcs.] (7) Nuts [4 pcs.] (8) Head rest (9) Bolts with washer [4 pcs.] 4913Q 6 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 15
from the front of the sewing machine (the direction of the arrow in the illustration), and then gently tilt back the machine head. NOTE: Two or more people should tilt back the machine head, and it should be tilted gently while being held with both hands. 2969B BAS-300G, BAS-311G, BAS-326G 7 - Brother International BAS-326G | Basic Instruction Manual - English - Page 16
places marked with * are also used to install the treadle unit. (Refer to "3-7. Installing the treadle unit (motor-driven work clamp specifications)".) (29) Gas spring support cover (30) Bolts with washer [6 pcs.] 4916Q 8 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 17
machine head switch is not turned on, errors "E050", "E051" and "E055" will be generated. 3-5. Tilting the sewing machine machine head. If you try to tilt back the machine head while the work clamp arm (1) is still on the left side, it may damage the outer cover L (2). BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 18
table into the control box through the hole in the side of the control box. (6) Staples [3 pcs.] 10 (1) Operation panel base (2) Cushion A (3) Plain washers (medium) [3 pcs.] (4) Bolts [3 pcs.] (5) Cushions B [3 pcs.] (6) Plain washers (large) [3 pcs.] (7) Nuts - Brother International BAS-326G | Basic Instruction Manual - English - Page 19
(right) is depressed, the sewing machine starts sewing. * The work clamp lowering method can be changed using memory switch No. 002. (Refer to "6-3. List of memory switch settings" in the instruction manual CD.) 2972B Work clamp switch (2-step) Start switch 4923Q BAS-300G, BAS-311G, BAS-326G 11 - Brother International BAS-326G | Basic Instruction Manual - English - Page 20
the ground connection. (Refer to "3-10. Connecting the ground wire".) 1. Gently tilt back the machine head. 2. Pass the cord bundle through the hole in the work table. 3. Loosen the (3) (3) (3) (3) (4) (4) (4) (4) P7 (PRG) (3) P3(CUTTER) - (Continued on next page) BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 21
Press the tab. 1843B Connector Machine head memory 7-pin Upper shaft motor 3-pin Synchronizer 14-pin Connector Work clamp/cable tie (4) (5) (5), (6) Cable tie (5), (6) (5), (6) (5), (6) (5), (6) (5), (6) (Continued on next page) BAS-300G, BAS-311G, BAS-326G 13 - Brother International BAS-326G | Basic Instruction Manual - English - Page 22
of receiving a serious electric shock, and problems with correct operation may also occur. (1) Ground wire from upper shaft motor harness (2) Ground wire from the machine head (3) Ground wire from operation panel are secure in order to ensure safety. 2973B 14 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 23
phase power. NOTE: Do not use an extension cord. If this is not observed, it may cause problems with correct operation. Green and yellow wire (ground wire) Green and yellow wire nut (3) so that the cotton stand does not move. 2974B BAS-300G, BAS-311G, BAS-326G 15 - Brother International BAS-326G | Basic Instruction Manual - English - Page 24
unit, adjust the air pressure. (Refer to "10-16. Adjusting the air pressure" in the instruction manual CD.) NOTE: Make sure that the pneumatic unit does not touch the control box or the work the power is turned off by pressing the manual button. 5220Q 1905B 16 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 25
. Installing the eye guard CAUTION Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. 3. INSTALLATION NOTE: Be careful not to clamp the cords when installing the motor cover. 2976B BAS-300G, BAS-311G, BAS-326G 17 - Brother International BAS-326G | Basic Instruction Manual - English - Page 26
the lubricating oil specified by Brother. * If this type of lubricating oil is difficult that the machine may seize during operation. ・ BAS-300G-03[] ・ BAS-311G ・ BAS-326G ・ BAS-300G-01[] ・ BAS-300G-02[] - Brother International BAS-326G | Basic Instruction Manual - English - Page 27
the needle. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. 1. Loosen the set screw parts> BAS-300G-03[], BAS-311G, BAS-326G BAS-300G-01[], 02[] Thread the upper thread 2370B Needle cooler 2978B • Turn the machine - Brother International BAS-326G | Basic Instruction Manual - English - Page 28
Threading mode> Threading mode is safe because the sewing machine will not start even when the foot switch is depressed. 1 Turn on the power switch. 2 All will return to where it was before threading mode was started. THREAD/CLAMP indicator switches off 20 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 29
CAUTION Do not touch any of the moving parts or press any objects against the machine while winding the lower thread. Injury or damage to the sewing machine may result. 4429Q 1. Place the bobbin onto assembly (8) down, and for case B, move it upward. For case B BAS-300G, BAS-311G, BAS-326G 21 - Brother International BAS-326G | Basic Instruction Manual - English - Page 30
power switch before installing the bobbin case. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. 2534Q 30mm 4945Q 1. Pull the shuttle race cover (1) insert the bobbin case into the rotary hook. 2535Q 22 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 31
(N) 0.2 − 0.3 Pre-tension (N) 0.1 − 0.6 0.1 − 0.3 Needle DP x 17 #19 DP x 5 #16 Normal sewing speed 2,000 sti/min 2,000 sti/min Seatbelt (-03[]) #4 or similar #4 or similar 1.2 − 2.0 1.0 − 1.5 0.3 to about 40 mm. Stronger Weaker Stronger Weaker 2153B BAS-300G, BAS-311G, BAS-326G 23 - Brother International BAS-326G | Basic Instruction Manual - English - Page 32
(6).) The sewing machine will move to the home position and the work clamp will rise. * For programs with a sewing start position. NOTE: If error "E110" appears when the foot switch is depressed, turn the pulley (1) in the direction of operation to clear the error. BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 33
when the power is turned on. (2) CAUTION indicator Illuminates when an error occurs. (3) RESET key Used to reset errors. (4) TEST key Used to start test mode. (5) TEST indicator Illuminates pressed to shown the Y-scale setting. 4435Q (Continued on next page) BAS-300G, BAS-311G, BAS-326G 25 - Brother International BAS-326G | Basic Instruction Manual - English - Page 34
the power is turned on. [Option compatibility] (22) Function keys [F1, F2, F3, F4] Used to select user programs and to set and select cycle programs. (23) R/W key Used to read data from and write data to external media. CFTM is a trademark of SanDisk Corporation. 26 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 35
the home position and the program number will be accepted. • The program number will stop flashing and illuminate steadily. NOTE: After completing the setting, be sure to refer to "5-6. Checking the sewing pattern" to check that the needle drop position is correct. BAS-300G, BAS-311G, BAS-326G 27 - Brother International BAS-326G | Basic Instruction Manual - English - Page 36
mm. 2. Press the or key (5) to set the scale (0 − 400). • The program number will flash in the PROGRAM No. display (6). 3. Depress the foot switch to the 2nd step. (If using a 2. Press the or key (4) to set the sewing speed. (Sewing speed setting: 400 − 2700) 4956Q 28 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 37
the home position and the program number will stop flashing and sewing will start. (If using a two-pedal foot switch, depress the start switch.) 4441Q 4 If test feeding continues to the final stitch, it will then stop. Press the TEST key. TEST indicator switches off BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 38
. 003 is set to "2" 5224Q Press the key. The sewing machine will switch to intermediate work clamp height setting mode. • " 3" will appear in the PROGRAM No. display, and the work clamp will move to the the work clamp lifter plate assembly (2). 4959Q 5254Q 30 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 39
3 Press the key. The sewing machine will switch to intermittent presser foot height setting mode. • " 4" will appear in the PROGRAM No. display, and the work clamp will "10-14. Changing the intermittent stroke" in the instruction manual CD. 5033Q BAS-300G, BAS-311G, BAS-326G 31 - Brother International BAS-326G | Basic Instruction Manual - English - Page 40
of more than 2GB are not supported.) • Do not disassemble or from the sewing machine while data is or writing to manual are trademarks or registered trademarks of the respective owners. However, no TM or other similar symbols appear in the main text of this manual. 32 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 41
machine. 6-1. Sewing 4978Q 1. Turn on the power switch. 2. Press the or key (1) to select the sewing program number that you would like to use. * Refer to "5-2. Loading sewing data" for details on reading sewing the work clamp and feed plate from being slippery. BAS-300G, BAS-311G, BAS-326G 33 - Brother International BAS-326G | Basic Instruction Manual - English - Page 42
step. (If using a two-pedal foot switch, depress the start switch.) • The sewing machine will start operating and sewing will start. 4441Q 6-3. Using the thread wiper switch The thread wiper switch (1) can be used to turn the thread wiper (2) on and off. 4983Q 34 BAS-300G, BAS-311G, BAS-326G - Brother International BAS-326G | Basic Instruction Manual - English - Page 43
MEMO BAS-300G, BAS-311G, BAS-326G 35 - Brother International BAS-326G | Basic Instruction Manual - English - Page 44
. * Please note that the contents of this manual may differ slightly from the actual product purchased as a result of product improvements. © 2005, 2008, 2010, 2011 Brother Industries, Ltd. All Rights Reserved. This is the original instructions. BAS-300G, 311G, 326G SA6235-401 E 2011.03. B (1)
BAS-300G
BAS-311G
BAS-326G
DIRECT DRIVE
PROGRAMMABLE ELECTRONIC PATTERN SEWER
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
This
basic
operation
manual
describes
basic
operations including sewing machine operations.
For cleaning, standard adjustments and more details,
please refer to the instruction manual contained in
the Document CD.
Basic Operation Manual