Brother International BAS-342E Programmer Instruction Manual - English - Page 134
Basting, Programming, when the needle point is at point A of
View all Brother International BAS-342E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Basting Chaprter 3 Programming with Command Function Basting is programmed. The example in the left is used for explanation of basting programming from point C to point F. Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press L when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 3. Repeat step 2 and create the program to point C. 4. Input point C and press 9 9 9 F . Input the basting command. 5. Move the work clamp with . Press L when the needle point is at point D of the pattern. 6. Repeat steps 4 and 5 and create the program to point F. 7. Create the program to points G and H as in step 2. Programmer 133
Programmer
133
Chaprter 3 Programming with Command Function
Basting
Basting is programmed. The example in the left is
used for explanation of basting programming from
point C to point F.
1
Programming
1.
Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
2.
Move the work clamp with
. Press
L
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3.
Repeat step 2 and create the program to
point C.
4.
Input point C and press
F
9
9
9
.
Input the basting command.
5.
Move the work clamp with
. Press
L
when the needle point is at point D of the
pattern.
6.
Repeat steps 4 and 5 and create the program
to point F.
7.
Create the program to points G and H as in
step 2.