Brother International BAS-370E Programmer Instruction Manual - English - Page 144
Brother International BAS-370E Manual
View all Brother International BAS-370E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Chaprter 3 Programming with Command Function Resizing 1. Move the needle to the reference point of resizing with . The pattern is resized to the home position if the needle is not moved. 2. Press 8 8 8 and press M . Input the resizing command. 3. Press 1 5 0 and press F . Input the resizing percentage for the X axis. Specify the . 150% magnification percentage by 3 digits in is specified in the example. 4. Press 1 5 0 and press M . Input the resizing percentage for the Y axis. Specify the magnification percentage by 3 digits in . 150% is specified in the example. 5. Input the stitch length. Press L . If the stitch length is 0.0, the pattern is resized with the same number of stitches as the original data. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press P . Programmer 143