Brother International BB370 Users Manual - English and Spanish - Page 19
the thread take-up lever from right to left
View all Brother International BB370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Turn off the machine. 1 Raise the presser foot lever. 2 While holding the thread from the spool 5 with your right hand, pass the thread toward you, in the groove on the thread guide. 1 • Make sure that the spring in the groove catches the thread. 1 1 1 Presser foot lever Raise the needle by turning the 3 handwheel toward you (counterclockwise) so that the mark on the wheel points up. • If the needle is not correctly raised, the sewing machine can not be threaded. 1 Spring Feed the upper thread as shown in the 6 following illustration. 1 1 Mark on the wheel Pull up the spool pin and put a spool of 4 thread on this pin. Make sure you guide the thread through 7 the thread take-up lever from right to left as shown in the following illustration. 1 CAUTION ● If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break. 1 1 Thread take-up lever Memo ● If the thread take-up lever is lowered, the upper thread can not be wrapped around the thread take-up lever. Make sure you raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up. 18