Brother International BE-1201B-AC Wiper Problems and Solutions - English - Page 7
Checking thread guide solenoid base, Front View
 |
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Checking thread guide solenoid base Check for a deformed pin on the positioning spacer, B. Also check the thread guide solenoid base at the very bottom to see if it has a bump. A damaged or missing lower arm cushion usually causes this. If the positioning spacer, B, is damaged or deformed it will need to be replaced. If the thread guide solenoid base is damaged or deformed sometimes it can be filed at the bottom to remove the bump in the metal or it can be replaced as well. Front View Thread Guide Solenoid Base Pin Positioning Spacer, B Washer Nut Damaged or deformed areas 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
7
Checking thread guide solenoid base
Check for a deformed pin on the positioning spacer, B. Also check the thread guide solenoid base
at the very bottom to see if it has a bump. A damaged or missing lower arm cushion usually
causes this. If the positioning spacer, B, is damaged or deformed it will need to be replaced. If the
thread guide solenoid base is damaged or deformed sometimes it can be filed at the bottom to
remove the bump in the metal or it can be replaced as well.
Front View
Positioning Spacer, B
Washer
Nut
Thread Guide Solenoid Base
Damaged or deformed areas
Pin