Brother International BE-1204C Instruction Manual - English - Page 224
Oiling, 2-1 Head
View all Brother International BE-1204C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Chapter 9 Maintenance 2. Oiling Supply oil to the following places at regular intervals. • When oiling, be sure to supply Brother's specified oil (Nippon Oil, Embroidery Lube 10N; VG10) using the dropper. * If this type of lubricating oil is difficult to obtain, the recommended oil to use is . • Excessive oiling may cause the material to be stained. • Be sure to wipe off excessive oils with waste cloth etc. 2-1 Head ! Supply one or two drops of oil to each needle bar from the oil supply hole of the lower cover daily. ! Lubricate the felt on the top surface of the head once a week. Felt W1221Q W1291Q 9-4 BE-1204B-BC • BE-1204C-BC • BE-1206B-BC
9-4
BE-1204B-BC ° BE-1204C-BC ° BE-1206B-BC
Chapter 9 Maintenance
2. Oiling
Supply oil to the following places at regular intervals.
°
When oiling, be sure to supply
Brother±s specified oil (Nippon Oil, Embroidery Lube 10N; VG10)
using
the dropper.
*
If this type of lubricating oil is difficult to obtain, the recommended oil to use is <Exxon Mobil Essotex
SM10; VG10>.
°
Excessive oiling may cause the material to be stained.
°
Be sure to wipe off excessive oils with waste cloth etc.
2-1 Head
!
Supply one or two drops of oil to each needle bar from the oil supply hole of the lower cover daily.
W1221Q
!
Lubricate the felt on the top surface of the head once a week.
W1291Q
Felt