Brother International BES-960BC Instruction Manual - English - Page 147
Automatic Step Back, Automatic Hoop Feed, Select [Automatic Step Back] from Settings menu.
View all Brother International BES-960BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Chapter 6 Embroidering Automatic Step Back Sets the number of stitches for automatic step back if thread breakage occurs. s The number of stitches that can be set is from 0 to 255. s Additional step-back can be made for sensitivity value of the thread breakage sensor. 1. Select [Automatic Step Back] from Settings menu. 2. Enter the number of stitches for automatic step back. Click here, and the value decreases/increases. Click here to give additional step-back for the sensing distance with the thread breakage sensor. 3. Click [OK]. Automatic Hoop Feed Sets automatic hoop feed for a thread breakage. 1. Select [Automatic Hoop Feed] from Settings menu and put the check mark (√). 152 BES-960BC • BES-1260BC
BES-960BC
•
BES-1260BC
152
Chapter 6
Embroidering
Automatic Step Back
Sets the number of stitches for automatic step back if thread breakage occurs.
■
The number of stitches that can be set is from 0 to 255.
■
Additional step-back can be made for sensitivity value of the thread breakage sensor.
1.
Select [Automatic Step Back] from Settings menu.
2.
Enter the number of stitches for automatic step back.
3.
Click [OK].
Automatic Hoop Feed
Sets automatic hoop feed for a thread breakage.
1.
Select [Automatic Hoop Feed] from Settings menu and put the check mark
(
√
).
Click here, and the value decreases/increases.
Click here to give additional step-back for the
sensing distance with the thread breakage sensor.