Brother International DB2-B773 Service Manual - Page 62
connector
View all Brother International DB2-B773 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Attaching the knee lifter switch @ Black Black White Red White No. 2 Black No. 5 White 1) Attach the knee lifter switch 0 to the table with the screw €1. (Refer to the figure in page 55 or 56.) 2) Connect the tips of the knee lifter switch code @ with the terminal pins 2 (black) and 5 (white) of the nylon connector 6p. 3) Connect the plug with black cord of the knee lifter switch 0 with the plug with the black cord of the knee lifter switch code @ . 4) Connect the plug (white or red) of the knee lifter switch 0 as described below; In the case that the plug with white cord of the knee lifter switch 0 is connected with the plug with the white cord of the knee lifter switch cord @; the presser foot is lowered when the treadle is not pressed , and the presser foot is raised when the knee lifter switch is pressed on. In the case that the plug with red cord of the knee lifter switch 0 is connected with the plug with the white cord of the knee lifter switch cord @; the presser foot stays up when the treadle is not pressed , and the presser foot is lowered when the knee lifter switch is pressed on. -58-