Brother International DCP-L5600DN Barcode Print Users Guide - Page 8

3.1.3 Barcode height ("v") Specifies the barcode height in 1/60th of an inch. ESC(s0p 30v,,,b,,,sh24600T123456789123 In this example, 30/60th means that the barcode height will be 0.5 in. (12.7 mm). 3.1.4 Barcode width ("b") Specifies the width of barcode bars. ESC(s0p 30v,,,b,,,sh24600T123456789123 3 This setting affects the total barcode width. To print smaller barcodes, specify smaller values. For 1D codes, four values need to be specified in 1/600th of an inch: 1. First (thin) bar width 2. Second bar width 3. Third bar width 4. Fourth bar width Alternatively, default values (",,,") can be used. The "ESC(s0p30v,,,b..." sequence will then give the same output as "ESC(s0p30v8,16,24,32b...". Example For UPC-A barcodes to be printed correctly, four different bar thicknesses are required. The output will vary depending on the specified values: Greater Values Smaller Values NOTE Not all barcode readers may be able to read small barcodes. 3.1.5 Barcode space width ("s") Specifies the width of the spaces between bars in a barcode. ESC(s0p 30v,,,b,,,sh24600T123456789123 For 1D codes, four values need to be specified in 1/600th of an inch: 1. First (thin) space width 2. Second space width 3. Third space width 4. Fourth space width 7