Brother International DZ3400 Operation Manual - Page 42
Adjusting the stitch length, and width
View all Brother International DZ3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SEWING BASICS Press (stitch selection keys). The c number of the selected stitch is displayed. Press the "+" or "-" side of to increase or reduce the number by one. Pressing on the right changes the digit on the right and pressing on the left changes the digit on the left. Adjusting the stitch length and width ■ [Example] Selecting stitch . Press the stitch selection keys to select stitch 05. a With on the right, select "5", and with on the left, select "0". X The stitch is selected. Memo ● The pattern numbers of the stitches are displayed on the machine. Press the "+" or "-" side of (stitch b length adjustment key) to increase or reduce the stitch length. Attach the presser foot indicated in the LCD. d a Presser foot type • For details, refer to "Replacing the presser foot" (page 36). Memo ● The presser foot to be used is indicated by the letter (J, A, etc.) that appears above or beside the stitch number. If necessary, adjust the stitch length and e width. • For details on sewing with each of the stitches, refer to the following example. a Stitch length b Stitch length adjustment key c Short d Long Press the "+" or "-" side of (stitch width c adjustment key) to increase or reduce the stitch width. a Stitch width b Stitch width adjustment key c Narrow d Wide Note ● When the stitch length or stitch width is changed from the standard setting, around or disappears from the LCD. When the stitch length or stitch width is reset back to the standard setting, reappears around or in the LCD. 40