Brother International Duetta 4500D Users Manual - English - Page 110
One-step buttonholes are sewn from the front of the presser foot to the back, as shown below.
View all Brother International Duetta 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
SEWING THE STITCHES One-step buttonholes are sewn from the front of the presser foot to the back, as shown below. a a a a Reinforcement stitching a Select a buttonhole stitch, buttonhole foot "A". and attach b Mark the position buttonhole on the and length fabric. of the a c Pull out the button holder plate on the presser foot, and insert the button that will be put through the buttonhole. Then tighten the button holder plate around the button. a Memo The maximum buttonhole length is about 28 mm (approx. 1-1/16 inches) (diameter + thickness of the button). a Button holder plate Memo The size of the buttonhole is decided by the button holder plate holding the button. 98
SEWING THE STITCHES
98
One-step buttonholes are sewn from the front of the presser foot to the back, as shown below.
a
Reinforcement stitching
a
Select a buttonhole stitch, and attach
buttonhole foot
“
A
”
.
b
Mark the position and length of the
buttonhole on the fabric.
c
Pull out the button holder plate on the
presser foot, and insert the button that will
be put through the buttonhole. Then tighten
the button holder plate around the button.
a
Button holder plate
a
a
a
a
Memo
The maximum buttonhole length is about
28 mm (approx. 1-1/16 inches) (diameter +
thickness of the button).
Memo
The size of the buttonhole is decided by the
button holder plate holding the button.
a